Be.Smart Technical Documentation
arkance.world
  • PRODUCTS
    • User Guides
  • Collections
    • Timber Collection
    • Metal Collection
    • Concrete Collection
    • Core Collection
  • 3D Modeling & Design
    • CLT Panels
      • Introduction
      • User Interface
      • Workflow - Step by Step
      • Wall Wood Framing
        • Frame Wall
          • Add Main Frame
          • Add Secondary Frame, Nailers, Siding
          • Validate Walls
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Wall Framing
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing or Window/Door Join Framing
          • L Connection
          • L, T, V, End Connections
          • Ridge Studs
          • Blocking/Nogging
          • Secondary Stud
          • Brace
          • Stud Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Stud
          • Add Vertical Block
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
        • Modify
        • Select Elements
        • Family - Siding Profile Modification
      • Floor Wood Framing
        • Frame Floor
          • Add Main Frame
          • Add Secondary Frame, Battens, Flooring
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Floor Framing
          • Opening Framing – General
          • Opening Framing – Edit
          • End Connection
          • Edge Joist
          • Blocking/Nogging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
      • Roof Wood Framing
        • Frame Roof
          • Add Main Frame
          • Add Secondary Frame, Battens, Roofing
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Roof Common Joists
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing
          • End Connection
          • Edge Joist
          • Horizontal Joist/Rafter/Bridging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
      • Elements
        • Requirements for Families and Categories
        • How to Use a Sample Project
        • Configuration Window
        • Detail Priorities Window
        • Detail Priority
          • Detail
          • Layout & Array Axis
          • Adjust Layout by Searching for other Elements
        • Inserting – and Auto Inserting – Elements
        • Update Elements, Update Parameters, Update by DC
        • Multi-Rule Manager
        • Modify Elements
        • Delete
        • Gravity Point
        • Configuration Files' Location
        • Template Project Location
        • Project Family Browser
        • Special Parameters
        • Schematic images of Host faces
      • Numbering
      • Views
      • Assemblies
      • Sort&Cope
    • Curtain Walls and Panels
      • Introduction
      • Getting Started
    • Cut Opening
      • Opening Configurations
        • MEP Openings Configurations
          • Main Settings
          • Insulation Settings
          • MEP settings
        • Door/Window Openings Configurations
        • Fire Damper Insertion Configuration
      • MEP Opening Creation
        • Interference Check
        • Application of Configuration
        • Insert Openings
        • Controlling the Opening Table
      • Opening Updates/Modifications
        • Join/Unjoin Openings
        • Opening Revision (Updates)
      • Export/Import MEP Openings
      • Insert Door/Window Openings
      • Insert Fire Dampers
      • Smart Dimensions
    • MEP Hangers
      • Getting Started
      • Resolving Common Issues
      • Families of Hangers and Supports
        • Introduction, Features, and Functionality
        • Adding New Sizes for Unistruts, Rods, Cantilevers or Other Parts
        • Criteria for Creating Your Own Families of Hangers/Supports
        • Scheduling and Bills of Materials
        • Drilling Points
        • Specifying Unistrut Increments for Fabrication and Family-based Hangers
      • Configurations
        • Hanger Configurations
        • Split Configurations
      • Commands
        • Insert Hangers
        • Split Elements
        • Update Hangers
        • Modify Elements and Multi-Rule Manager
        • Delete Hangers
        • Replace IFC
      • Sort Mark
      • Placing Hangers On Linked MEP Elements
    • Metal Framing
      • Introduction
      • Workflow - Step by Step
      • Wall Metal Framing
        • Introduction
        • Frame Wall
          • Add Main Frame
          • Add Secondary Frame, Siding
          • Validate Walls
        • Framing Configuration
          • Dialogue
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Wall Framing
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing or Window/Door Join Framing
          • L Connection – General
          • L, T, V, End Connections
          • Blocking/Nogging
          • Secondary Stud
          • Brace
          • Ridge Studs
          • Stud Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Stud
          • Add Vertical Block
          • Add/Modify Bracing
            • Main Features
            • Modify Brace
            • Modify Brace Group
          • Add/Modify Details
            • General
            • Details Configuration
          • Add/Delete Additional Details
        • Align/Trim/Extend
          • Align Elements[]
          • Cut/Delete/Move/Rotate Elements[]
          • Split Elements[]
        • Sheating And Paneling Layouts
          • Main Features[]
          • Sheathing Configuration
          • Paneling Configuration[]
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
        • Load Families
        • Link Wall
        • Multi-Framing
        • Framing in Groups
        • Modify
        • Select Elements
      • Floor Metal Framing
        • Introduction
        • Frame Floor
          • ADD MAIN FRAME
          • ADD SECONDARY FRAME, FLOORING
        • Load Families
        • Link Floor
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Floor Framing
          • Opening Framing
            • General
            • Edit[]
          • End Connection
          • Edge Joist
          • Bridging/Nogging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Multi-Framing
        • Framing in Groups
        • Add/Modify Elements
          • Main Features[]
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Details
          • General
          • Details Configuration[]
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements[]
          • Split Elements[]
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features[]
          • Sheathing Configuration
          • Paneling Configuration[]
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features[]
          • Configuration
            • Assembly Views[]
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
      • Roof Metal Framing
        • Introduction
        • Frame Roof
          • Add Main Frame
          • Add Secondary Frame, Battens, Roofing
        • Load Families
        • Link Roof
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Roof Common Joists
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing[]
          • End Connection
          • Edge Joist
          • Horizontal Joist/Rafter/Bridging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Multi-Framing
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Details
          • General
          • Details Configuration[]
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Elements[]
          • Cut/Delete/Move/Rotate Elements[]
          • Split Elements[]
        • Select Elements
        • Insert Rafters
        • Sheating And Paneling Layouts
          • Main Features[]
          • Sheathing Configuration
          • Paneling Configuration[]
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features[]
          • Drawing Configuration
            • Assembly Views[]
            • Schedules
            • Sheets
          • Smart Dimensions
        • Part Assembly Menu
      • Truss Metal Framing
        • Introduction
        • Load Families
        • Truss Database Manager
        • Truss System Configuration
        • Truss Design Settings
        • Element Mark Configuration
        • Modify Roof/Floor Truss Type Parameters
        • Insert Truss System Grid
        • Modify Truss System Grid
        • Update Truss System Grid From Roof
        • Insert Valley Set Grid
        • Generate Trusses
        • Delete Trusses By Grid
        • Select Trusses From The Same Group/Grid
        • Select Identical Trusses From The Same Group
        • Insert Roof/Floor Truss By Selected Model Lines
        • Modify Truss Inserted By Model Line
        • Create Roof Truss Type From Model Lines
        • Create Piggyback Roof Truss Type From Model Lines
        • Modify Roof Truss Type
        • Replace Roof/Floor Truss From Database/Model
        • Update Roof/Floor Truss
        • Copy/Array/Auto Array Roof/Floor Truss
        • Auto Copy Two Roof/Floor Trusses
        • Modify Truss Ends
        • Update Truss Roof/Floor Connections
        • Cut/Cope Roof/Floor Truss Members
        • Select Roof/Floor Truss Webs And Chords
        • Frame Two Beams
        • Scheduling And Sorting
        • Shop Drawing Configuration
        • Create Assembly From Truss
        • Update Truss Assembly
        • Smart Dimensions for Trusses
        • Typical Workflow For Floor Truss
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Sort Mark
      • Smart Assemblies
      • Sort&Cope
        • Cope Structural Elements
      • Common
        • Wood/Metal Framing
          • Custom Join
          • Framing Configuration
            • Modify Configuration Settings
            • Modify Settings
            • Opening Framing – Edit
            • End Connection
            • Rigde Stud/Joist
            • Blocking/Nogging
            • Brace
            • Stud/Joist Holes
          • Add/Modify Elements
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Stud/Joists
          • Add/Modify Bracing
            • Modify Brace
            • Modify Brace Group
          • Sheating And Paneling Layouts
            • Sheathing Configuration – Sheathing Layout
            • Paneling Configuration – Paneling Layout
          • Shop Drawings – Smart Dimensions – Configuration
          • Framing Configuration - Configuration Visibility
        • Smart Dimensions
        • Smart Tags
      • Configuration Files
        • Introduction
        • Manage Configuration Files
        • Sharing Configurations
    • Post & Beam Framing
      • Introduction
      • Workflow - Step by Step
      • Wall Wood Framing
      • Floor Wood Framing
      • Roof Wood Framing
      • Truss Wood Framing
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Cut Opening [to be created]
      • Sort Mark
      • Smart Assemblies
      • Smart Views
      • Sort&Cope
      • Common
    • Precast Concrete
      • Introduction
      • Smart Walls
      • Floor Panel Layout
      • Floor Concrete Slabs
        • Workflow
        • Load Families
        • Configuration Window
          • Overview
          • Longitudinal Flooring
        • Link Floor
        • Add Flooring
      • Smart Connections
      • Wall Reinforcement
        • Wall Reinforcement Workflow
        • Wall Link
        • Create Rebar
        • Rebar cover reference
        • Update Rebar
        • Partially Update Rebar
        • Update by Wall Link
        • Modify Rebar
        • Delete Rebars
        • Configuration Files Location
        • Rebar Configurations - Common Settings
        • Perimeter Reinforcement
        • External/Internal Reinforcement
        • Additional Edge Rebar
        • Opening, Door, Window Reinforcement
        • T Connection Reinforcement
        • L Corner Reinforcement
        • Fabric Sheets - Fabric Area
        • Additional Reinforcement
        • Face Rebar Configurations
      • Column Reinforcement
        • Workflow
        • Rebar Configurations
        • Cover settings
        • Rectangular
        • Stirrups
        • Rebar Configurations Corbel
        • Create Rebar
        • Modify Reinforcement
        • Update Rebar
        • Update by Column Link
        • Delete Rebar
        • Column Link
        • Configuration Files Location
        • Rebar Configurations Main rebar Crank
        • Bend
        • Round
      • Beam Reinforcement
        • Beam Reinforcement Workflow
        • Rebar configurations
        • Cover settings
        • Main rebar
        • Stirrups
        • Modify Rebar
        • Update rebar
        • Update by Beam Link
        • Delete Rebar
        • Beam Link
        • Configuration Files Location
        • Rebar configurations Main Rebar Ends
        • Rebar configurations Support
      • Sort Mark
      • Smart Assemblies
      • Smart Views
    • SIP Panels
      • Introduction
      • Workflow - Step by Step
      • Split & Cut SIP Parts
      • Wall Wood Framing
      • Floor Wood Framing
      • Roof Wood Framing
      • Truss Wood Framing
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Cut Opening [to be created]
      • Sort Mark
      • Smart Assemblies
      • Smart Views
      • Sort&Cope
      • Common
    • Smart Connections
      • Introduction
      • Workflow
      • Requirements for Families and Categories
      • How to Use a Sample Project
      • Configuration Window
      • Detail Priority
        • Detail
        • Layout & Array Axis
        • Adjust Layout by Searching for other Elements
        • Placement Control
      • Inserting – and Auto Inserting – Elements
      • Update Elements, Update Parameters, Update by DC
      • Multi-Rule Manager
      • Modify Elements
      • Delete
      • Gravity Point
      • Configuration Files' Location
      • Template Project Location
      • Project Family Browser
      • Special Parameters
      • Schematic images of Host faces
    • Ventilated Facades
      • Introduction
      • Getting Started
    • Wood Framing
      • Wall Wood Framing
        • Introduction
        • Frame Wall
          • Add Main Frame
          • Add Secondary Frame, Nailers, Siding
          • Validate Walls
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Wall Framing
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing or Window/Door Join Framing
          • L Connection
          • L, T, V, End Connections
          • Ridge Studs
          • Blocking/Nogging
          • Secondary Stud
          • Brace
          • Stud Holes
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Stud
          • Add Vertical Block
        • Add/Modify Details
          • General
          • Details Configuration
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Split Parts by invisible lines
          • Paneling Configuration
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Drawing Configuration – Sheets
          • Main Features
          • Part Assembly Menu
          • Smart Dimensions
        • Load Families
        • Link Wall
        • Multi-Framing
        • Framing In Groups
        • Add/Delete Additional Details
        • Modify
        • Select Elements
        • Family - Siding Profile Modification
      • Floor Wood Framing
        • Introduction
        • Frame Floor
          • Add Main Frame
          • Add Secondary Frame, Battens, Flooring
        • Load Families
        • Link Floor
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Floor Framing
          • Opening Framing – General
          • Opening Framing – Edit
          • End Connection
          • Edge Joist
          • Blocking/Nogging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Multi-Framing
        • Framing In Groups
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Modify Brace
          • Modify Brace Group
          • Main Features
        • Add/Modify Details
          • General
          • Details Configuration
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
      • Roof Wood Framing
        • Introduction
        • Frame Roof
          • Add Main Frame
          • Add Secondary Frame, Battens, Roofing
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Roof Common Joists
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing
          • End Connection
          • Edge Joist
          • Horizontal Joist/Rafter/Bridging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Load Families
        • Link Roof
        • Multi-Framing
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Details
          • General
          • Details Configuration
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Insert Rafters
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
      • Truss Wood Framing
        • Introduction
        • Load Families
        • Truss Database Manager
        • Truss System Configuration
        • Truss Design Settings
        • Element Mark Configuration
        • Modify Roof/Floor Truss Type Parameters
        • Insert Truss System Grid
        • Modify Truss System Grid
        • Update Truss System Grid From Roof
        • Insert Valley Set Grid
        • Generate Trusses
        • Delete Trusses By Grid
        • Select Trusses From The Same Group/Grid
        • Select Identical Trusses From The Same Group
        • Insert Roof/Floor Truss By Selected Model Lines
        • Modify Truss Inserted By Model Line
        • Create Roof Truss Type From Model Lines
        • Create Piggyback Roof Truss Type From Model Lines
        • Modify Roof Truss Type
        • Replace Roof/Floor Truss From Database/Model
        • Update Roof/Floor Truss
        • Copy/Array/Auto Array Roof/Floor Truss
        • Auto Copy Two Roof/Floor Trusses
        • Modify Truss Ends
        • Update Truss Roof/Floor Connections
        • Cut/Cope Roof/Floor Truss Members
        • Select Roof/Floor Truss Webs And Chords
        • Frame Two Beams
        • Scheduling And Sorting
        • Shop Drawing Configuration
        • Create Assembly From Truss
        • Update Truss Assembly
        • Smart Dimensions for Trusses
        • Typical Workflow For Floor Truss
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Cut Opening
      • Sort Mark
      • Smart Assemblies
      • Smart Views
      • Sort&Cope
        • COPE STRUCTURAL ELEMENTS
      • Common
        • Wood/Metal Framing
          • Custom Join
          • Framing Configuration
            • Modify Configuration Settings
            • Modify Settings
            • Opening Framing – Edit
            • End Connection
            • Rigde Stud/Joist
            • Blocking/Nogging
            • Brace
            • Stud/Joist Holes
          • Add/Modify Elements
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Stud/Joists
          • Add/Modify Bracing
            • Modify Brace
            • Modify Brace Group
          • Sheating And Paneling Layouts
            • Sheathing Configuration – Sheathing Layout
            • Paneling Configuration – Paneling Layout
          • Shop Drawings – Smart Dimensions – Configuration
          • Framing Configuration - Configuration Visibility
        • Smart Dimensions
        • Smart Tags
    • Smart Select
      • Select & Hide
      • Quick Select
    • Archive
      • (Archive) Setup: Sample Families & Configurations
      • (Archive) Workflow Overview
      • (Archive) Setup: Sample Families & Configurations
      • Wood Framing (work in progress)
        • Workflow - Step by Step
        • Wall Wood Framing
          • Introduction
          • Frame Wall
            • Add Main Frame
            • Add Secondary Frame, Nailers, Siding
            • Validate Walls
          • Framing Configuration
            • Dialog
            • Configurations
            • Common Settings
              • Configuration Settings
              • Modify Configuration Settings
              • Elements Mark Definitions
              • Modify Settings
            • Wall Framing
            • Opening Framing
              • General
              • Edit
              • Edit Window/Window Join Framing or Window/Door Join Framing
            • L Connection
            • L, T, V, End Connections
            • Ridge Studs
            • Blocking/Nogging
            • Secondary Stud
            • Brace
            • Stud Holes
          • Add/Modify Bracing
            • Main Features
            • Modify Brace
            • Modify Brace Group
          • Add/Modify Elements
            • Main Features
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Stud
            • Add Vertical Block
          • Add/Modify Details
            • General
            • Details Configuration
          • Align/Trim/Extend
            • Align Elements
            • Cut/Delete/Move/Rotate Elements
            • Split Elements
          • Sheating And Paneling Layouts
            • Main Features
            • Sheathing Configuration
            • Split Parts by invisible lines
            • Paneling Configuration
          • Numbering
            • General
            • Numbering Configuration
          • Shop Drawings
            • Main Features
            • Drawing Configuration
              • Assembly Views
              • Schedules
              • Drawing Configuration – Sheets
            • Main Features
            • Part Assembly Menu
            • Smart Dimensions
          • Load Families
          • Link Wall
          • Multi-Framing
          • Framing In Groups
          • Add/Delete Additional Details
          • Modify
          • Select Elements
          • Family - Siding Profile Modification
        • Floor Wood Framing
          • Introduction
          • Frame Floor
            • Add Main Frame
            • Add Secondary Frame, Battens, Flooring
          • Load Families
          • Link Floor
          • Framing Configuration
            • Dialog
            • Configurations
            • Common Settings
              • Configuration Settings
              • Modify Configuration Settings
              • Elements Mark Definitions
              • Modify Settings
            • Floor Framing
            • Opening Framing – General
            • Opening Framing – Edit
            • End Connection
            • Edge Joist
            • Blocking/Nogging
            • Secondary Joist
            • Brace
            • Joist Holes
          • Multi-Framing
          • Framing In Groups
          • Add/Modify Elements
            • Main Features
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Joist
            • Add Vertical Block
          • Add/Modify Bracing
            • Modify Brace
            • Modify Brace Group
            • Main Features
          • Add/Modify Details
            • General
            • Details Configuration
          • Add/Delete Additional Details
          • Modify
          • Align/Trim/Extend
            • Align Elements
            • Cut/Delete/Move/Rotate Elements
            • Split Elements
          • Select Elements
          • Sheating And Paneling Layouts
            • Main Features
            • Sheathing Configuration
            • Paneling Configuration
          • Numbering
            • General
            • Numbering Configuration
          • Shop Drawings
            • Main Features
            • Drawing Configuration
              • Assembly Views
              • Schedules
              • Sheets
            • Part Assembly Menu
            • Smart Dimensions
        • Roof Wood Framing
          • Introduction
          • Frame Roof
            • Add Main Frame
            • Add Secondary Frame, Battens, Roofing
          • Framing Configuration
            • Dialog
            • Configurations
            • Common Settings
              • Configuration Settings
              • Modify Configuration Settings
              • Elements Mark Definitions
              • Modify Settings
            • Roof Common Joists
            • Opening Framing
              • General
              • Edit
              • Edit Window/Window Join Framing
            • End Connection
            • Edge Joist
            • Horizontal Joist/Rafter/Bridging
            • Secondary Joist
            • Brace
            • Joist Holes
          • Load Families
          • Link Roof
          • Multi-Framing
          • Add/Modify Elements
            • Main Features
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Joist
            • Add Vertical Block
          • Add/Modify Bracing
            • Main Features
            • Modify Brace
            • Modify Brace Group
          • Add/Modify Details
            • General
            • Details Configuration
          • Add/Delete Additional Details
          • Modify
          • Align/Trim/Extend
            • Align Elements
            • Cut/Delete/Move/Rotate Elements
            • Split Elements
          • Select Elements
          • Insert Rafters
          • Sheating And Paneling Layouts
            • Main Features
            • Sheathing Configuration
            • Paneling Configuration
          • Numbering
            • General
            • Numbering Configuration
          • Shop Drawings
            • Main Features
            • Drawing Configuration
              • Assembly Views
              • Schedules
              • Sheets
            • Part Assembly Menu
            • Smart Dimensions
        • Truss Wood Framing
          • Introduction
          • Load Families
          • Truss Database Manager
          • Truss System Configuration
          • Truss Design Settings
          • Element Mark Configuration
          • Modify Roof/Floor Truss Type Parameters
          • Insert Truss System Grid
          • Modify Truss System Grid
          • Update Truss System Grid From Roof
          • Insert Valley Set Grid
          • Generate Trusses
          • Delete Trusses By Grid
          • Select Trusses From The Same Group/Grid
          • Select Identical Trusses From The Same Group
          • Insert Roof/Floor Truss By Selected Model Lines
          • Modify Truss Inserted By Model Line
          • Create Roof Truss Type From Model Lines
          • Create Piggyback Roof Truss Type From Model Lines
          • Modify Roof Truss Type
          • Replace Roof/Floor Truss From Database/Model
          • Update Roof/Floor Truss
          • Copy/Array/Auto Array Roof/Floor Truss
          • Auto Copy Two Roof/Floor Trusses
          • Modify Truss Ends
          • Update Truss Roof/Floor Connections
          • Cut/Cope Roof/Floor Truss Members
          • Select Roof/Floor Truss Webs And Chords
          • Frame Two Beams
          • Scheduling And Sorting
          • Shop Drawing Configuration
          • Create Assembly From Truss
          • Update Truss Assembly
          • Smart Dimensions for Trusses
          • Typical Workflow For Floor Truss
        • Smart Connections
        • Smart Walls
        • Floor Panel Layout
        • Roof Panel Layout
        • Cut Opening
        • Sort Mark
        • Smart Assemblies
        • Smart Views
        • Sort&Cope
          • COPE STRUCTURAL ELEMENTS
        • Common
          • Wood/Metal Framing
            • Custom Join
            • Framing Configuration
              • Modify Configuration Settings
              • Modify Settings
              • Opening Framing – Edit
              • End Connection
              • Rigde Stud/Joist
              • Blocking/Nogging
              • Brace
              • Stud/Joist Holes
            • Add/Modify Elements
              • Add Additional Bridging/Nogging/Blocking
              • Add Additional Stud/Joists
            • Add/Modify Bracing
              • Modify Brace
              • Modify Brace Group
            • Sheating And Paneling Layouts
              • Sheathing Configuration – Sheathing Layout
              • Paneling Configuration – Paneling Layout
            • Shop Drawings – Smart Dimensions – Configuration
            • Framing Configuration - Configuration Visibility
          • Smart Dimensions
          • Smart Tags
  • 2D Drafting & Documentation
    • Smart Documentation
      • Views (Smart Views)
      • Assemblies (Smart Assemblies)
      • Predefined Dimensions (Smart Dimensions)
      • Numbering (Sort Mark)
      • Create Tables (Excel2R)
      • Manage Tables (Excel2R)
      • Import Data From Excel (Excel2R)
      • Dynamic Legend
        • Sample Block Preparation
        • Create / Edit Legend
        • Create / Edit Legend With Preselected Types
        • Update All Legends
      • Manage Sheets/Viewports (Smart Sheets)
        • Manage Sheets
        • Manage Viewports
      • QR/Barcode Generator
      • Distribute Views on Sheets
      • Quick Dimensions
        • Dimension Chains Between 2 Points
        • Walls Dimensioning
        • Dimension Offsets and Joining
      • Rebar Images
  • Design Data Management & Exchange
    • Classification System
      • Quick start
      • Create classification system
      • Create table
      • Create/edit classes and sub-classes
      • Import / export Excel tables
      • Comparing classification systems
      • Managing users and their rights
      • Update user profile
      • Extensions
        • Extension for Autodesk® Revit®
        • Extension for Autodesk® Navisworks®
        • Extension for Autodesk® Civil3D®
        • Extension for TEKLA Structures
      • Value Pattern
    • CNC Exporters
      • Getting Started
      • Weinmann BTL
        • INTRODUCTION
        • User Interface
          • Ribbon
          • Export Setup window
            • Common Settings
              • Advanced Setup (Element Identification and Mark)
            • Export Settings
            • Advanced Setup Configuration
          • Advanced Setup window
            • Interior Sheating Nailing/Stapling
            • Exterior Sheating Nailing/Stapling
            • Siding Trimming
            • Siding Nailing
      • Weinmann BTL CLT
        • INTRODUCTION
        • FEATURES
      • Weinmann WUP
        • Introduction
        • User Interface
          • Ribbon
          • Export Setup window
            • Common Settings
              • Advanced Setup (Element Identification and Mark)
            • Export Settings
            • Advanced Setup Configuration
          • Advanced Setup window
            • Element Identification
            • Main Frame
            • Membrane Nailing
            • Interior Sheathing Nailing/Stapling
            • Exterior Sheathing Nailing/Stapling
            • Sheathing Trimming
            • Position Marking
            • Siding Trimming
            • Siding Nailing
      • Hundegger BVX
        • Introduction
        • User Interface
          • Ribbon
          • Export Setup window
            • Common Settings
              • Advanced Setup (Element Identification and Mark)
            • Export Settings
      • EasyFrame EZF
        • INTRODUCTION
        • FEATURES
        • EXPORT SETUP
        • ADVANCED SETUP
      • CNC Metal Exporter
        • Introduction
        • Revit Add-in
          • Getting Started
          • Features
          • Set New or Modify CNC Type
          • Adjust Detail Families for Export
          • Most Popular CNC Commands
        • Cloud Version
          • Getting Started
          • Upload Revit Project
          • Start Export
          • Modify CNC configuration settings
          • Invite Users
    • Smart Browser
      • Introduction
      • Getting Started
      • Browser Options
      • Library Creation
      • Modify Families
        • Modification Window
        • Saving Modification file
      • Modification functions
      • Modify Families in Excel
      • Run Modifications
      • Update Families in Project
      • Project Browser
      • Add Subcategories
      • Upgrade Families / Projects
      • Transfer Family Units
      • Add Shared Parameters
  • Common for several products
    • Floor Panel Layout
      • Introduction
      • Panel Layout
      • Floor supports
      • Create Panels
      • Place Floor by Room
      • Direction of slab layout
    • Roof Panel Layout
      • Introduction
    • Smart Assemblies
      • Workflow
      • Shop Drawing Configurations
        • Introduction
        • Assembly Views
        • Common options
        • Sheets
        • Insert Grid Lines
        • Schedules
      • Dimensioning Rules
        • Introduction
        • Main Element Geometry
        • Hosted Metal Details
        • Hosted Concrete Details
        • Smart Dimensions
        • Rebar Bars
        • Dimensioning Priority & Notes
        • Note positioning
      • Special Parameters
        • Build in Place
        • Special Parameters for Gravity Point
        • Exclude from Gravity Point Calculations
        • Exclude from Total Measure
      • Create and Auto Create Assemblies
      • Update and Update by DC
      • Recalculate Assemblies
      • Manage Assemblies
      • Modify SDC by Instance
      • Save SDC from Assembly
      • Create Rebar images
      • Dynamic Smart Assemblies Update
      • Template Project
      • Gravity Point and Element Mass
      • How to Add Legends to Assembly Sheets
    • Smart Dimensions
      • Introduction
      • Menu
      • Configuration Window
      • Configuration Settings
      • Common Settings
      • Text Note Settings
      • Dimensioning Tabs
      • Structural Rebar
      • Dimension to Nearest
      • How to measure elements from Linked models
      • How to measure any desired point of a family
      • Smart Dimensions Configurations (new)
    • Smart Tags
      • Smart Tags Configurations
      • Smart Tags Menu
      • Tagging/Dimensioning Tabs in Smart Tags & Smart Dimensions
    • Smart Views
      • Workflow
      • Configuration Setup
      • View Name
      • Smart Dimensions
      • Smart Tags
      • Distribute Views on Sheets
    • Smart Walls
      • INTRODUCTION
      • MODIFY CALCULATE
      • GAP CONFIGURATION
      • SPLIT WALLS
      • INTERLOCK SPLIT MENU
    • Sort Mark
      • Room, Space, Sheet, Element Numbering
      • Batch Numbering Elements
      • Element Marking One by One
      • QR/Barcode Generator
      • Door Swing Directions
      • Grid Numbering
      • Orientation (N, S, E, W)
      • Flip (Mirror) Orientation
      • Calculate Coordinates
      • Calculate Elevations
  • Getting started
    • Quick Start
      • ARKANCE Dock System Requirements
      • ARKANCE Dock Installation Guide
      • Trial Activation
      • Standalone vs Network license
      • Standalone License
        • Standalone License Activation
        • Standalone License Migration to a New Workstation
        • Standalone License Deactivation
      • Network License
        • Network License Activation
        • Network License Manual Activation
        • Network License Deactivation
        • Network License Migration to a New Server
        • Network License Server Renewal
      • Updates
    • FAQ
      • Who is currently using network license seats?
      • Where to find my License Activation Key?
      • How to hand off a Network License seat to another User
      • Where can I find tool configurations?
      • How do I borrow a network license?
      • How to hide/unhide an add-on from the Revit ribbon?
      • How to remove a tool from the Revit ribbon
      • How to release a Network License
      • How to revert to a previous version of a tool?
      • Technical Support Workhours
    • Troubleshooting
      • Unexpected Error Occurred
      • Fatal Error Occurred
      • Unable to deactivate the previous license
      • Excel2R Error When Updating or Creating New Schedules
      • Slps.Distributor.Host.exe in Quarantine by anti-virus
      • I bought a license, but it shows a trial version
      • Access to the path 'TOOLS 4 BIM’ is denied
      • Cannot access AppStore error
      • ARKANCE Dock does not appear in the Revit ribbon after installation
      • Provided key is for a single machine license error
      • An error occurs when activating the license
      • Location path is too long
      • Unable to download the ARKANCE Dock via https://agacad.com/dock
      • An unrecoverable error has occurred
      • Network License: Server Installation Error
      • Network License: Agacad Dock Deployment
      • Tools' .msi direct links
      • Network License: Server Error in ‘/Web’ Application
      • Network License Error: Maximum number of activations exceeded
      • Network License: License is Not Visible
      • Network License: Could Not Connect to the Server
      • Network License: Activation Failed Error
      • Network License: Borrowed License Release Issue
  • contact support
Powered by GitBook
On this page
  • Predefined Layout Name
  • Select Layout from Database Configuration
  • Link with Configuration
  • New Item, Remove Item, Move Up, Move Down
  • Symbolic Preview
  • X-Position
  • Position
  • Align Type
  • Samples of various wall joins
  • Extend Start, Extend End, Cuts
  • Cut Type
  • Cut Ends Type
  • Preassembled
  • Build in Place
  • Link to Connected Wall/Floor/Roof

Was this helpful?

  1. 3D Modeling & Design
  2. Wood Framing
  3. Common
  4. Wood/Metal Framing

Custom Join

Last updated 5 months ago

Was this helpful?

Custom Join – is a multi-functional dialog where user can define rules for studs/joins including size, count, position, rotation, spacing, alignment etc. All these rules can be saved and used in other framing configurations or shared with other users. This type of dialog is used frequently in our products.

Predefined Layout Name

Predefined Layout Name – here you can check the predefined configuration name. Configurations saves all information listed down below. Default Configuration is a sample configuration that comes with the software.

All modifications can be saved to the current configuration using Save to Database.

Duplicate – duplicates existing configuration in order to create a new one.

Delete – deletes configuration from the database.

Default path to database with layout configurations is:

C:\Users\user name\AppData\Roaming\Tools 4 Revit\Wall+2021 (or other product and version) Configurations\CustomFramingJoins

Every configuration is created in a separate XML file and stored in corresponding folder.

If needed you can modify the path to all configurations in Wall+, Floor+ or Roof+ → Settings → Configuration Files‘ Location.

Select Layout from Database Configuration

Select Layout from Database Configuration – select layout from the list.

Link with Configuration

Link with Configuration – makes a link between selected layout in the current custom join and other custom joints were the same layout was used.

In order to use Link with Configuration switch this option in Framing Configuration – Enable "Link to Configuration" in Custom Joins:

For example, were is two wall frames which is created using different configuration names. Now we need to make one top/bottom plate instead of two in all frames:

Instead of changing top/bottom plates manually one by one for every configuration, just change the layout, save it and switch ON Link with Configuration:

Now in other configuration make sure that Link with Configuration is switched ON too:

After updating frames with Update Frame using Wall Link, modifying or creating new frames, top/bottom plates now will have one element instead of two:

New Item, Remove Item, Move Up, Move Down

New Item – adds new stud/joist.

Remove Item – removes selected stud/joist.

Move Up – moves selected stud/joist up.

Move Down – moves selected stud/joist down.

Symbolic Preview

Symbolic Preview – shows symbolic preview of created situation. You can easily see the position, rotation, alignment type, and sample spacing. Preview in the picture above is for regular stud/joist. It will be a little bit different for headers, connections etc.

It does not show exact stud/joist sizes and spacing between them.

1 and 2 indicate the sides of the intersecting wall/floor/roof. These sides are used for stud/joist positioning.

I or E indicate where the Internal (Bottom) or External (Top) sides of the wall/floor/roof are.

X-Position

X-Position – controls stud/joist position related to intersecting wall/floor/roof.

Standard – places the stud/joist without any alignment with intersecting wall/floor/roof:

Inner Side 1 – places the stud/joist along inner side 1 of intersecting wall/floor/roof:

Inner Side 2 – places the stud/joist along inner side 2 of intersecting wall/floor/roof:

Outer Side 2 – place the stud/joist along outer side 2 of intersecting wall/floor/roof:

Side 1 by Center – centers the stud/joist with intersecting wall/floor/roof side 1:

Side 2 by Center – centers the stud/joist with intersecting wall/floor/roof side 2:

Center – places the stud/joist at center of intersecting wall/floor/roof:

Example with floor/roof vertical block. First joist is added without any alignment:

Example with floor/roof vertical block. Inner Side 1 – places the joist along its first inner side:

Example with floor/roof vertical block. Inner Side 2 – places the joist along its second inner side:

Example with floor/roof vertical block. Outer Side 1 – places the joist along its first outer side:

Example with floor/roof vertical block. Outer Side 2 – places the joist along its second outer side:

Example with floor/roof vertical block. Center – places the joist along its center:

Count – defines the number of identical studs/joists.

Example, two top plates are used in wall framing:

Type – selected stud/joist family and type. Default families are loaded together with the software. Any time can be loaded manually using Wall+, Floor+ or Roof+ → Settings → Load Families function.

Depth by Core – stud/joist size will be adjusted according to the wall/floor/roof layer thickness during wall/floor/roof framing process.

Rotate 90° – rotates selected stud/joist by 90 degrees.

Example with horizontal Joist/Rafter/Bridging: Rotate 90° is ON:

Example with horizontal Joist/Rafter/Bridging: Rotate 90° is OFF:

Example with additional joist, Rotate 90° is ON:

Example with additional joist, Rotate 90° is OFF:

Wall example:

Example with additional stud if ticked:

Example with additional stud if unticked:

Example with additional bridging/nogging when ticked:

Example with additional bridging/nogging when unticked:

Example with wood floor: when Rotate 90° is switched OFF:

Example with metal frame:

Ticked:

Unticked:

Example with metal additional stud: Rotate 90° is ticked:

Example with metal additional stud: Rotate 90° is unticked:

Rotate 180 – rotates selected stud/joist by 180 degrees. This option is important when the stud/joist is not symmetrically shaped. For rectangular studs/joists this option usually is not used.

Example with metal wall studs:

Example with metal wall blocking, strap:

Spacing – distance between the selected stud/joist and the previous stud/joist.

Position

Position – stud/joist can be positioned along the Center, External, Internal, External Outside, Internal Outside, Center External, Center Internal wall/floor/roof face, or Outside Near Connected Wall. The possible option values depend on Rotate 90 selected value.

Near Connected Wall – option used if the stud/joist must always be near the side where another wall connects.

Near Connected Wall + Depth – option used if the stud/joist must always be near the side where other wall/floor/roof connects, and the stud/joist depth must be the same as connected wall/floor/roof layer thickness.

Example with floor:

Example with wall:

Align Type

Align Type – the selected stud/joist can be aligned with the previous stud‘s/joist's End or Start, core inside or core outside.

Example with metal:

Samples of various wall joins

Extend Start, Extend End, Cuts

Extend Start, Extend End – controls start/end stud/joist connection with other elements from the wall/floor/roof frame. It can extend and cut both sides of the beam depending on the L or T connection with other beams.

Cut – select if stud/joist should cut the connected plate.

Example: Wall+ finds that end stud/joist is connected with plate in "L" connection. In this case, it is extended in both sides and cuts the plate:

Example: opening Top Support is connected with Trimming Joists in "L" connection. In this case, it is extended on both sides and cut. Header is not extended.

Example with blocking/nogging/bridging: Extend Ends is switched OFF:

Example with blocking/nogging/bridging: Extend Ends is switched ON:

Example: Roof+ finds that joists from block are connected with top and bottom plates in "T" connection. In such cases, it is extended and cut.

Example with a wall: when Extend Ends is switched OFF...

...and when Extend Ends is switched ON:

Example with wall additional bridging: Extend Ends is switched OFF:

Example with wall additional bridging: Extend Ends is switched ON:

Example: Wall+ finds that studs from block are connected with top and bottom plates in "T" connection. In such cases, it is extended and cut.

Example: Floor+ finds that end joist is connected with rim joist in "L" connection. In this case, it is extended on both sides and cuts:

Example with floor: when Extend Ends is ON:

Example: when Extend Ends is OFF:

Cut Type

Cut Type – select blocking/nogging/bridging and joist connection cutting type.

Possible options:

Example: when Cut Type = None

Example: when Cut Type = Cut Joists

Example, when Cut Type = Cut Bridging/Nogging/Blocking

Example with wall: When None is selected:

Example: When Cut Studs is selected:

Example with wall additional bridging: when Cut Type = Don't Cut

Example with wall additional bridging: when Cut Type = Cut Studs

Example with wall additional bridging, when Cut Type = Cut Additional Element

Example with floor: when Don't Cut is selected:

Example: when Cut Joists is selected:

Example with metal wall bridging/nogging:

Example with metal wall frame , when Cut Type = Cut Additional Element

Cut Ends Type

Cut Ends Type – select bridging/nogging end cutting type.

Example: when Don't Cut is selected:

Example: when Cut Joists is selected:

Example: when Cut Bridging/Nogging/Blocking is selected:

Preassembled

Fills information into these parameters:

FM Module Type – writes configuration name.

FM Module Mark – writes FS (Frame Start) or FE (Frame End) values + L (Left) or R (Right) + Mark (from Wall/Floor/Roof).

FM Module Preassembled – writes Yes/No if element is/is not included into preassembly.

Example: Free end stud/joist is included into the preassembling so FM Module Type parameter has end connection configuration value, FM Module Mark parameter contains FS (Frame Start) + L (Left) + current wall Mark value (it can be seen near FM HostMemberSortMark).

Example with roof opening:

FM Module Mark – writes Framing Member Mark + Mark (from Roof) + Mark (from Opening).

Opening Header2 is included in the preassembly so FM Module Type parameter has opening framing configuration name, FM Module Mark parameter contains Framng Member Mark parameter value + current roof Mark value (can be seen near FM HostMemberSortMark) + current window Mark.

Example with floor/roof vertical block:

FM Module Type – writes configuration name.

FM Module Mark – writes roof mark.

Example with wall king stud:

FM Module Type

For Windows, Doors and Openings – writes opening type (Window, Door, Opening, JoinedOpening).

For Connections – writes join configuration name.

FM Module Mark – writes FM Module Type + Mark (from Wall) + Mark (from Window, Door or Opening) + unique number.

FM Module Preassembled – writes Yes/No if element is (or is not) included in the preassembly.

King is included in preassembly so FM Module Type parameter has Window value because this King belongs to the window, FM Module Mark parameter contains FM Module Type parameter value (Window) + current wall Mark value (it can be seen near FM HostMemberSortMark) + current window Mark + unique number.

Example with wall vertical block:

FM Module Type – writes configuration name.

FM Module Mark – writes wall mark.

Example with floor opening:

FM Module Type

For Openings – writes opening type.

For Connections – writes join configuration name.

FM Module Mark – writes FM Module Type + Mark (from Floor) + Mark (from Opening) + unique number.

FM Module Preassembled – writes Yes/No if element is (or is not) included in the preassembly.

Example:

Header2 is included in preassembly so FM Module Type parameter has Opening value, FM Module Mark parameter contains FM Module Typeparameter value (Opening) + current floor Mark value (F-1, can be seen near FM HostMemberSortMark) + current window Mark + unique number.

Example with floor end connection:

FM Module Type – writes end connection configuration name.

FM Module Mark – writes FS (Frame Start) or FE (Frame End) values + L (Left) or R (Right) + Mark (from Floor).

FM Module Preassembled – writes Yes/No if element is/is not included into preassembly.

Example: Edge joist is included into the preassembling, so FM Module Type parameter has end connection configuration value, FM Module Mark parameter contains FS (Floor Start) + L (Left) + current floor Mark value (it can be seen near FM HostMemberSortMark).

Example with metal opening king:

FM Module Type

For Windows, Doors, and Openings – writes opening type. For Connections – writes join configuration name.

FM Module Mark – writes Framing Member Mark + Left or Right + Mark (from Wall) + Mark (from Window, Door or Opening).

FM Module Preassembled – writes Yes/No if element is (or is not) included in the preassembly.

Example:

King is included in the preassembly so FM Module Type parameter has Door value, because this King belongs to the door, FM Module Mark parameter contains Framing Member Mark parameter value + Right value + current wall Mark value (can be seen near FM HostMemberSortMark) + current door Mark.

Example with metal T connection:

FM Module Type – writes connection configuration name.

FM Module Mark – writes FS (Frame Start), FE (Frame End) or TC (T Connection) values + L (Left) or R (Right) + Mark (from Wall).

FM Module Preassembled – writes Yes/No if element is/is not included into preassembly.

Example: T stud is included into the preassembling so FM Module Type parameter has T connection configuration value, FM Module Mark parameter contains TC (T Connection) + current wall Mark value (it can be seen near FM HostMemberSortMark).

Example with metal floor opening trimming joist:

FM Module Type

For Openings – writes opening configuration name.

For Connections – writes join configuration name.

FM Module Mark – writes Framing Member Mark + Left or Right value + Mark (from Floor).

FM Module Preassembled – writes Yes/No if element is (or is not) included in the preassembly.

Example with metal floor end connection:

FM Module Type – writes end connection configuration name.

FM Module Mark – writes FS (Frame Start) or FE (Frame End) values + L (Left) or R (Right) + Mark (from Floor).

FM Module Preassembled – writes Yes/No if element is/is not included into preassembly.

Example: Edge joist is included into the preassembling, so FM Module Type parameter has end connection configuration value, FM Module Mark parameter contains FS (Floor Start) + L (Left) + current floor Mark value (it can be seen near FM HostMemberSortMark).

Example with additional floor joist:

FM Module Type – writes configuration name.

FM Module Mark – writes floor mark.

Example with metal roof:

FM Module Type – writes opening type name.

FM Module Mark – writes FM Module Type + Mark (from Roof) + Mark (from Opening) + unique number.

FM Module Preassembled – writes Yes/No if element is (or is not) included in the preassembly.

Example:

Example with roof edge:

FM Module Type – writes end connection configuration name.

FM Module Mark – writes FS (Frame Start) or FE (Frame End) values + L (Left) or R (Right) + Mark (from Roof).

FM Module Preassembled – writes Yes/No if element is/is not included into preassembly.

Example: Edge joist is included into the preassembling, so FM Module Type parameter has end connection configuration value, FM Module Mark parameter contains FS (Roof Start) + L (Left) + current roof Mark value (it can be seen near FM HostMemberSortMark).

All these parameters can later be used in the schedules and view filters.

Build in Place

Build in Place – writes Yes/No information into beam instance parameter if the beam is built-in-place or is prefabricated with whole wall/floor/roof frame.

Example with wall corner studs:

Example with bottom rim joist:

Example with opening top header:

Example with roof end:

Example with floor bridging:

Example with floor additional joist:

Example with floor/roof vertical block:

Example with wall bottom pad:

Example with metal wall bottom pad:

Example with wall additional stud:

Example with wall vertical block:

Example with floor end connection:

Example with metal opening king stud:

Example with T connection:

Example with metal bridging:

Example with metal additional stud:

Example with metal frame corner brace:

Example with metal floor opening trimming joist blocking:

Example with metal floor end:

Example with metal floor additional joist:

Example with metal roof:

Example with metal roof end:

Example with wall additional blocking:

Link to Connected Wall/Floor/Roof

Link to Connected Wall/Floor/Roof – choose this option if end stud/joist is near wall/floor/roof corner and the element should be prefabricated and connected to an intersecting wall/floor/roof.

Example with wall corner:

Example with opening trimming joist:

Example with opening king stud:

Example with metal opening king stud:

Example with metal T connection:

Example with metal floor opening trimming joist: