# Paneling Configuration\[]

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FJuc8v5jO9cj6bdtXAJNx%2F0.jpeg?alt=media)

or:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FeUSi7h5VtWMg4IZtuq1N%2F1.jpeg?alt=media)

**Paneling Configuration – allows you to configure and save settings for the paneling layouts.**

**These settings can be saved and linked with roof layer using Link Roof.**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FnYwcwa3ZsS6viXB5Pmqb%2F2.jpeg?alt=media)

**Using Paneling Configuration you can predefine insulation and paneling setting for your Revit project.**

**Insulation or panels are created using Revit Parts. In order to see the panels or insulation, you have to select Show Parts or Show Both in View Properties → Parts Visibility.**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F36XlQBHmHtH4GwVttVQY%2F3.jpeg?alt=media)

**These settings can be saved and linked with roof layer using Link Roof.**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F6J10QIkOBIY8o96ZB9iw%2F4.jpeg?alt=media)

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FZ9Pc7fg6H4laTLJeBvYI%2F5.jpeg?alt=media)

**Paneling Dimensions**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2Fu6SHFOnGM3ayuaSdQ1I9%2F6.jpeg?alt=media)

**Paneling Dimensions** – predefine vertical and horizontal paneling sizes (Width and Length).

**Paneling Layout**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FUvYn8aobYcp9H4Eem74t%2F7.jpeg?alt=media)

**Paneling Layout** – predefine settings for creating the paneling.

[**Read more about every feature here >> (https://agacad.freshdesk.com/support/solutions/articles/44002140223-sheathingand-paneling-layouts-%E2%80%93-paneling-configuration-%E2%80%93-paneling-layout)**](https://agacad.freshdesk.com/support/solutions/articles/44002140223-sheathing-and-paneling-layouts-%E2%80%93-paneling-configuration-%E2%80%93-paneling-layout)

### Special Layout

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FszrP1tnauVhDeiWdIP3e%2F8.jpeg?alt=media)

**Special Layout** – place for applying special layout that can't be defined with regular **Paneling Dimensions**. To enable all possible options switch on **Enable Special Layout**.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FGAW5Ky47UA7sOLhHdXtE%2F9.jpeg?alt=media)

### Division Profile

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FhJpDk3w6n9uYHmgl8pnR%2F10.jpeg?alt=media)

**Horizontal/Vertical Gap** – specifies the distance between divided horizontal and vertical parts. The default value is 0, which results in no gap.

Note that if **Always Try to Merge Parts** is ticked ON, Gap will not be applicable.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FdBSW8E86CiDtVYt98zPt%2F11.jpeg?alt=media)

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FjpXQfxdpLWEXQW7qziyN%2F12.jpeg?alt=media)

**Horizontal/Vertical Division Profile** – apply the pre-loaded profile you select from the drop-down list to part edges along dividers. The default value is None.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2Fv1Ui4h0jeMIHm6QK7HoG%2F13.jpeg?alt=media)![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2Fptcl5mbNrudMVJrn1M33%2F14.jpeg?alt=media)

**Horizontal/Vertical Profile Edge Mirrored** – specify how the profiles on the other side of a divider gap will be oriented.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FkpZ6GTswta1CxfKEosr9%2F15.jpeg?alt=media)

**Mark Settings**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FG9KwqeWW3LH6HtuLMMTN%2F16.jpeg?alt=media)

**Mark Settings** – predefine default values for these parameters. The parameters can be later used in schedules and tags.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F0PR7y6dHoPOo7nbWx5fU%2F17.jpeg?alt=media)

**Part Detail Configuration** and **Framing Configuration** – you can predefine default configurations to be added to every part.

Detail configuration comes from [**Smart Details (http://www.aga-cad.com/products/bim-solutions/smart-details)**.](http://www.aga-cad.com/products/bim-solutions/smart-details) **Smart Details** can instantly add any number of face-specific intelligent details – which adapt to host-element changes – throughout BIM models.

**Opening**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FrBNPvF431QicbIaOGwub%2F18.jpeg?alt=media)

**Opening** – predefine top, bottom, left, and right paneling offsets from the opening.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FPJt6IZeX5Ge081jeL5AL%2F19.jpeg?alt=media)

**End Connection**

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FFT1oscUeOp8ZMyW8wDSS%2F20.jpeg?alt=media)

**End Connection** – predefine paneling settings for roof end connections.

**Layer Extension** – distance from a roof face.

*Example: For the free end connection **Layer Extension** = 20:*

**Split at Joist** – define the joist number where the panel must be split.

*Example: **Split at Joist** = 1:*

**Build in Place** – writes Yes/No information into the panel instance parameter if it is build-in-place or is prefabricated with whole roof frame. Later this parameter can be used in schedules or view filters.

**Excluded –** removes the panel (part) from the model. Excluded panels are only visible when under the cursor and will not be included in schedules.

Preview