# Position Marking

<figure><img src="/files/qENqccyBGFlEOBr1Jgdv" alt=""><figcaption></figcaption></figure>

## Table

* ***Operation*** - provides a number for reference to use with the preview image.

***

* ***Marking*** – provides a description of the processing area.

***

* ***Mark Side*** – lets you choose how many lines should be printed to indicate nailer position:
  * ***Both*** – markings will be printed indicating both, left and right sides of the vertical nailers, and top and bottom sides of horizontal nailers
  * ***Left/Right*** – markings will be printed only on selected side (vertical nailers only)
  * ***Top/Bottom*** - markings will be printed only on selected side (horizontal nailers only)

***

* ***Perform*** – turns off operation for the specified area

***

* ***Control Code*** – machine-specific code to control and customize various aspects of how the processing is supposed to be performed


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.besmart.software/design-data-management-and-exchange/cnc-exporters/weinmann-wup/user-interface/advanced-setup-window/position-marking.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.