Ribbon
Last updated
Last updated
Weinmann BTL CNC Exporter is very minimal when it comes to Revit ribbon. Everything is packed into one ribbon icon inside the T4R CNC tab:
By expanding the menu, you will be met with several options to choose from:
Opens a selection window where you can choose a location where your configuration options will be saved:
In the Personal Configurations ( 1 ) selection, you can see the current path to a location on your machine where the files are currently saved.
If you wish to change the path, simply click Browse ( 2 ) button on the right.
However, you can have more than one configuration location saved in case you have shared network location in your company or simply want to use different locations for different projects locally.
Shared Company Configurations ( 3 ) can be selected to add a new path to a new location.
If more locations are required, you can press the + ( 4 ) sign in the bottom left corner. This will add more Shared Company Configurations ( 3 ) lines
After you are done selecting, do not forget to press Save & Close ( 5 ) to confirm your changes and to close the window
Export Setup - this option opens the Export Setup window, which is the main place location to control and configure all the options available in the exporter. Read more about the Export Setup window by going here:
Advanced Setup - this option opens the Advanced Setup window, where you can control and configure options that are related to elements that are not part of the model and are generated by the exporter, like nailing. Read more about the Advanced Setup window by going here:
The following options are all used to actually perform an export. There are two ways you can use these options:
Pre-select an element(s) or assembly(s) and then select the option, to be presented with the configuration selection window.
Select the option first, then select the desired element(s) or assembly(s) and then press ESC on your keyboard to finish the selection. Then you are going to be presented with the configuration selection window.
Export Framing Element - this option is used to export only one element of your choice.
Export selected Wall Frames to CNC - this option exports the whole framed assembly(-ies) of the selected wall(s).
Export all Wall Frames to CNC - this option collects and exports all framed wall assemblies in the current project.
Export selected Floor Frames to CNC - this option exports the whole framed assembly(-ies) of the selected floor(s).
Export all Floor Frames to CNC - this option collects and exports all framed floor assemblies in the current project.
Export selected Roof Frames to CNC - this option exports the whole framed assembly(-ies) of the selected roof(s).
Export all Floor Frames to CNC - this option collects and exports all framed roof assemblies in the current project.
Export Truss to CNC - this option exports the whole framed assembly(-ies) of the selected truss(s).
Export all Trusses to CNC - this option collects and exports all framed truss assemblies in the current project.
Export Elements from Schedule - this option exports all the structural framing elements present in the currently open schedule window.
