# Add Main Frame

### Frame Wall

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F0AT98vLBC2ZtyYIkyRgH%2F0.jpeg?alt=media)

Or:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F1dXytTNpic7wmeXPKeQK%2F1.jpeg?alt=media)

**Frame Wall** – frames selected walls or parts from the model according to predefined configuration.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FZO8D8KJz24mNbbDRA7dw%2F2.jpeg?alt=media)

### First time in the project

The first time you click **Frame Wall** in a new project, you will get a message that the framing families are not loaded. You can load them directly from here:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FFWecLdBu2ebG6ZLkO121%2F3.jpeg?alt=media)

Just click OK:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FDTjWkPjHXaLxyB2cnxCL%2F4.jpeg?alt=media)

Framing families can be also loaded using **Wall+** → **Settings** → **Load Families**:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FUYbhaS9bRd2CFrijSH6s%2F5.jpeg?alt=media)

[Read more about Load Families here](https://docs.besmart.software/3d-modeling-and-design/wood-framing/wall-wood-framing/load-families)

**Wall+** checks the status of selected walls. If there is something wrong with the walls, you will get a detailed report. In the image below, you can see possible report messages.

*Let's solve the problem of wall type **Int - 16+198+13**:*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F2M5LOw2gXRhjQZHAPWm0%2F6.jpeg?alt=media)

*To fix these kinds of problems, you usually need to go to **Link Wall** and check the situation:*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FK30X5EjhvlDF6JINtWRS%2F7.jpeg?alt=media)

***Int - 16+198+13** has framing possibility disabled, so you just need to select the checkbox near the **Frame** column:*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F9dN48MC5DJ857ace85FB%2F8.jpeg?alt=media)

*There is no problem if framing configuration in not assigned to the layer. You can assign it in the **Link Wall** dialog, or **Wall+** will give you this option during the **Frame Wall** process:*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FNq8jOkjbCTsLkIV5bgVW%2F9.jpeg?alt=media)

*Selected a sample framing configuration, which automatically comes with **Wall+,** and click OK:*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FgT3QyHIgam9ctowOoNM9%2F10.jpeg?alt=media)

*Result:*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2Fy9Ae2KPuEXaQraM90vsK%2F11.jpeg?alt=media)

[Read more about Link Wall here](https://docs.besmart.software/3d-modeling-and-design/wood-framing/wall-wood-framing/link-wall)

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FUb6cvFkW58RQDQMUB6xv%2F13.png?alt=media)