# Validate Walls

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F9BUbH45Q0ZCE51vDXTbX%2F0.jpeg?alt=media)

**Validate Walls –** checks if the walls in the current project fit the predefined settings. Only validated walls should be framed.

Predefine the settings for wall validation → click **Check Walls in Project**.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FmWEGQ4JgryusfwMhW8pg%2F1.jpeg?alt=media)

*Result:*

**Wall+** scans all walls in the current project and provides a report as to whether they fit the predefined sizes:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FfJJVJk2M3lbKR9bFxw2W%2F2.jpeg?alt=media)

**Wall+** also analyzes the layers in the wall and gives a report about the wall types.

*For example, **Wall+** will frame the layer if it has a material assigned, so there is an option to select **Wall layer must have material assigned** and check all wall types. In this same dialog, you can click **Edit Type** and go to wall type modification where you have the option to assign the needed material.*

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F9WsS660ylX9YE3K8mUSA%2F3.jpeg?alt=media)

Here you can assign the needed material and this wall type will be ready for the framing process:

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F6CdwkL1mP8NrhDFoKR7u%2F4.jpeg?alt=media)

After adding a material, close the dialog and run **Validate Walls** again to make sure the problem has been solved.

![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2F2Uv8J82rvK7uBDAWDH6G%2F6.png?alt=media)