# Membrane Nailing

<figure><img src="/files/h3eH0spZN4s4Z29vrtg7" alt=""><figcaption></figcaption></figure>

* Here are the options to control how the membrane for the assembly is supposed to be nailed:
  * ***Operation*** – provides a number for reference to use with the preview image.
  * ***Offset from Edge*** – provides a description of the processing area.
  * ***Perform*** – turns off processing for the specified area.
  * ***Nailing Spacing*** – lets you choose spacing between nails
  * ***Nailing Type/Device Index*** - machine-specific code to control and customize various aspects of how the processing is supposed to be performed.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.besmart.software/design-data-management-and-exchange/cnc-exporters/weinmann-wup/user-interface/advanced-setup-window/membrane-nailing.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.