Sheathing Configuration
Last updated
Last updated
or:
Sheathing Configuration – allows you to configure and save settings for sheathing layouts. These settings can be saved and linked with floor layer using Link Floor.
Sheathing Dimensions – predefine vertical and horizontal sheathing sizes (Width and Length).
Sheathing Layout – predefine settings for Top and Bottom sheathing layers.
Read more about every feature here
Division Profile – apply the pre-loaded profile and settings to part edges along dividers.
Horizontal/Vertical Gap – specifies the distance between divided horizontal and vertical parts. The default value is 0, which results in no gap.
Horizontal/Vertical Division Profile – apply the pre-loaded profile you select from the drop-down list to part edges along dividers. The default value is None.
Horizontal/Vertical Profile Edge Mirrored – specify how the profiles on the other side of a divider gap will be oriented.
Mark Settings – predefine default values for these parameters for later use in schedules and tags.
Opening – predefine top, bottom, left, and right sheathing offsets from opening.
End Connection – predefine sheathing settings for floor end connections.
Layer Extension – distance from floor face.
Example: For the free end connection, Layer Extension = 20:
Split at Joist – define the joist number at which the sheathing must be split.
Example: Split at Joist = 1:
Build in Place – writes Yes/No information into the sheathing instance parameter if it is build-in-place or is prefabricated with the whole floor frame. This parameter can later be used in schedules or view filters.
Excluded – removes the sheathing (part) from the model. Excluded sheathings are only visible when under the cursor and will not be included in schedules.
