Be.Smart Technical Documentation
arkance.world
  • PRODUCTS
    • User Guides
  • Collections
    • Timber Collection
    • Metal Collection
    • Concrete Collection
    • Core Collection
  • 3D Modeling & Design
    • CLT Panels
      • Introduction
      • User Interface
      • Workflow - Step by Step
      • Wall Wood Framing
        • Frame Wall
          • Add Main Frame
          • Add Secondary Frame, Nailers, Siding
          • Validate Walls
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Wall Framing
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing or Window/Door Join Framing
          • L Connection
          • L, T, V, End Connections
          • Ridge Studs
          • Blocking/Nogging
          • Secondary Stud
          • Brace
          • Stud Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Stud
          • Add Vertical Block
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
        • Modify
        • Select Elements
        • Family - Siding Profile Modification
      • Floor Wood Framing
        • Frame Floor
          • Add Main Frame
          • Add Secondary Frame, Battens, Flooring
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Floor Framing
          • Opening Framing – General
          • Opening Framing – Edit
          • End Connection
          • Edge Joist
          • Blocking/Nogging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
      • Roof Wood Framing
        • Frame Roof
          • Add Main Frame
          • Add Secondary Frame, Battens, Roofing
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Roof Common Joists
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing
          • End Connection
          • Edge Joist
          • Horizontal Joist/Rafter/Bridging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
      • Elements
        • Requirements for Families and Categories
        • How to Use a Sample Project
        • Configuration Window
        • Detail Priorities Window
        • Detail Priority
          • Detail
          • Layout & Array Axis
          • Adjust Layout by Searching for other Elements
        • Inserting – and Auto Inserting – Elements
        • Update Elements, Update Parameters, Update by DC
        • Multi-Rule Manager
        • Modify Elements
        • Delete
        • Gravity Point
        • Configuration Files' Location
        • Template Project Location
        • Project Family Browser
        • Special Parameters
        • Schematic images of Host faces
      • Numbering
      • Views
      • Assemblies
      • Sort&Cope
    • Curtain Walls and Panels
      • Introduction
      • Getting Started
    • Cut Opening
      • Opening Configurations
        • MEP Openings Configurations
          • Main Settings
          • Insulation Settings
          • MEP settings
        • Door/Window Openings Configurations
        • Fire Damper Insertion Configuration
      • MEP Opening Creation
        • Interference Check
        • Application of Configuration
        • Insert Openings
        • Controlling the Opening Table
      • Opening Updates/Modifications
        • Join/Unjoin Openings
        • Opening Revision (Updates)
      • Export/Import MEP Openings
      • Insert Door/Window Openings
      • Insert Fire Dampers
      • Smart Dimensions
    • MEP Hangers
      • Getting Started
      • Resolving Common Issues
      • Families of Hangers and Supports
        • Introduction, Features, and Functionality
        • Adding New Sizes for Unistruts, Rods, Cantilevers or Other Parts
        • Criteria for Creating Your Own Families of Hangers/Supports
        • Scheduling and Bills of Materials
        • Drilling Points
        • Specifying Unistrut Increments for Fabrication and Family-based Hangers
      • Configurations
        • Hanger Configurations
        • Split Configurations
      • Commands
        • Insert Hangers
        • Split Elements
        • Update Hangers
        • Modify Elements and Multi-Rule Manager
        • Delete Hangers
        • Replace IFC
      • Sort Mark
      • Placing Hangers On Linked MEP Elements
    • Metal Framing
      • Introduction
      • Workflow - Step by Step
      • Wall Metal Framing
        • Introduction
        • Frame Wall
          • Add Main Frame
          • Add Secondary Frame, Siding
          • Validate Walls
        • Framing Configuration
          • Dialogue
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Wall Framing
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing or Window/Door Join Framing
          • L Connection – General
          • L, T, V, End Connections
          • Blocking/Nogging
          • Secondary Stud
          • Brace
          • Ridge Studs
          • Stud Holes
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Stud
          • Add Vertical Block
          • Add/Modify Bracing
            • Main Features
            • Modify Brace
            • Modify Brace Group
          • Add/Modify Details
            • General
            • Details Configuration
          • Add/Delete Additional Details
        • Align/Trim/Extend
          • Align Elements[]
          • Cut/Delete/Move/Rotate Elements[]
          • Split Elements[]
        • Sheating And Paneling Layouts
          • Main Features[]
          • Sheathing Configuration
          • Paneling Configuration[]
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
        • Load Families
        • Link Wall
        • Multi-Framing
        • Framing in Groups
        • Modify
        • Select Elements
      • Floor Metal Framing
        • Introduction
        • Frame Floor
          • ADD MAIN FRAME
          • ADD SECONDARY FRAME, FLOORING
        • Load Families
        • Link Floor
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Floor Framing
          • Opening Framing
            • General
            • Edit[]
          • End Connection
          • Edge Joist
          • Bridging/Nogging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Multi-Framing
        • Framing in Groups
        • Add/Modify Elements
          • Main Features[]
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Details
          • General
          • Details Configuration[]
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements[]
          • Split Elements[]
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features[]
          • Sheathing Configuration
          • Paneling Configuration[]
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features[]
          • Configuration
            • Assembly Views[]
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
      • Roof Metal Framing
        • Introduction
        • Frame Roof
          • Add Main Frame
          • Add Secondary Frame, Battens, Roofing
        • Load Families
        • Link Roof
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Roof Common Joists
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing[]
          • End Connection
          • Edge Joist
          • Horizontal Joist/Rafter/Bridging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Multi-Framing
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Details
          • General
          • Details Configuration[]
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Elements[]
          • Cut/Delete/Move/Rotate Elements[]
          • Split Elements[]
        • Select Elements
        • Insert Rafters
        • Sheating And Paneling Layouts
          • Main Features[]
          • Sheathing Configuration
          • Paneling Configuration[]
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features[]
          • Drawing Configuration
            • Assembly Views[]
            • Schedules
            • Sheets
          • Smart Dimensions
        • Part Assembly Menu
      • Truss Metal Framing
        • Introduction
        • Load Families
        • Truss Database Manager
        • Truss System Configuration
        • Truss Design Settings
        • Element Mark Configuration
        • Modify Roof/Floor Truss Type Parameters
        • Insert Truss System Grid
        • Modify Truss System Grid
        • Update Truss System Grid From Roof
        • Insert Valley Set Grid
        • Generate Trusses
        • Delete Trusses By Grid
        • Select Trusses From The Same Group/Grid
        • Select Identical Trusses From The Same Group
        • Insert Roof/Floor Truss By Selected Model Lines
        • Modify Truss Inserted By Model Line
        • Create Roof Truss Type From Model Lines
        • Create Piggyback Roof Truss Type From Model Lines
        • Modify Roof Truss Type
        • Replace Roof/Floor Truss From Database/Model
        • Update Roof/Floor Truss
        • Copy/Array/Auto Array Roof/Floor Truss
        • Auto Copy Two Roof/Floor Trusses
        • Modify Truss Ends
        • Update Truss Roof/Floor Connections
        • Cut/Cope Roof/Floor Truss Members
        • Select Roof/Floor Truss Webs And Chords
        • Frame Two Beams
        • Scheduling And Sorting
        • Shop Drawing Configuration
        • Create Assembly From Truss
        • Update Truss Assembly
        • Smart Dimensions for Trusses
        • Typical Workflow For Floor Truss
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Sort Mark
      • Smart Assemblies
      • Sort&Cope
        • Cope Structural Elements
      • Common
        • Wood/Metal Framing
          • Custom Join
          • Framing Configuration
            • Modify Configuration Settings
            • Modify Settings
            • Opening Framing – Edit
            • End Connection
            • Rigde Stud/Joist
            • Blocking/Nogging
            • Brace
            • Stud/Joist Holes
          • Add/Modify Elements
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Stud/Joists
          • Add/Modify Bracing
            • Modify Brace
            • Modify Brace Group
          • Sheating And Paneling Layouts
            • Sheathing Configuration – Sheathing Layout
            • Paneling Configuration – Paneling Layout
          • Shop Drawings – Smart Dimensions – Configuration
          • Framing Configuration - Configuration Visibility
        • Smart Dimensions
        • Smart Tags
      • Configuration Files
        • Introduction
        • Manage Configuration Files
        • Sharing Configurations
    • Post & Beam Framing
      • Introduction
      • Workflow - Step by Step
      • Wall Wood Framing
      • Floor Wood Framing
      • Roof Wood Framing
      • Truss Wood Framing
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Cut Opening [to be created]
      • Sort Mark
      • Smart Assemblies
      • Smart Views
      • Sort&Cope
      • Common
    • Precast Concrete
      • Introduction
      • Smart Walls
      • Floor Panel Layout
      • Floor Concrete Slabs
        • Workflow
        • Load Families
        • Configuration Window
          • Overview
          • Longitudinal Flooring
        • Link Floor
        • Add Flooring
      • Smart Connections
      • Wall Reinforcement
        • Wall Reinforcement Workflow
        • Wall Link
        • Create Rebar
        • Rebar cover reference
        • Update Rebar
        • Partially Update Rebar
        • Update by Wall Link
        • Modify Rebar
        • Delete Rebars
        • Configuration Files Location
        • Rebar Configurations - Common Settings
        • Perimeter Reinforcement
        • External/Internal Reinforcement
        • Additional Edge Rebar
        • Opening, Door, Window Reinforcement
        • T Connection Reinforcement
        • L Corner Reinforcement
        • Fabric Sheets - Fabric Area
        • Additional Reinforcement
        • Face Rebar Configurations
      • Column Reinforcement
        • Workflow
        • Rebar Configurations
        • Cover settings
        • Rectangular
        • Stirrups
        • Rebar Configurations Corbel
        • Create Rebar
        • Modify Reinforcement
        • Update Rebar
        • Update by Column Link
        • Delete Rebar
        • Column Link
        • Configuration Files Location
        • Rebar Configurations Main rebar Crank
        • Bend
        • Round
      • Beam Reinforcement
        • Beam Reinforcement Workflow
        • Rebar configurations
        • Cover settings
        • Main rebar
        • Stirrups
        • Modify Rebar
        • Update rebar
        • Update by Beam Link
        • Delete Rebar
        • Beam Link
        • Configuration Files Location
        • Rebar configurations Main Rebar Ends
        • Rebar configurations Support
      • Sort Mark
      • Smart Assemblies
      • Smart Views
    • SIP Panels
      • Introduction
      • Workflow - Step by Step
      • Split & Cut SIP Parts
      • Wall Wood Framing
      • Floor Wood Framing
      • Roof Wood Framing
      • Truss Wood Framing
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Cut Opening [to be created]
      • Sort Mark
      • Smart Assemblies
      • Smart Views
      • Sort&Cope
      • Common
    • Smart Connections
      • Introduction
      • Workflow
      • Requirements for Families and Categories
      • How to Use a Sample Project
      • Configuration Window
      • Detail Priority
        • Detail
        • Layout & Array Axis
        • Adjust Layout by Searching for other Elements
        • Placement Control
      • Inserting – and Auto Inserting – Elements
      • Update Elements, Update Parameters, Update by DC
      • Multi-Rule Manager
      • Modify Elements
      • Delete
      • Gravity Point
      • Configuration Files' Location
      • Template Project Location
      • Project Family Browser
      • Special Parameters
      • Schematic images of Host faces
    • Ventilated Facades
      • Introduction
      • Getting Started
    • Wood Framing
      • Wall Wood Framing
        • Introduction
        • Frame Wall
          • Add Main Frame
          • Add Secondary Frame, Nailers, Siding
          • Validate Walls
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Wall Framing
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing or Window/Door Join Framing
          • L Connection
          • L, T, V, End Connections
          • Ridge Studs
          • Blocking/Nogging
          • Secondary Stud
          • Brace
          • Stud Holes
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Stud
          • Add Vertical Block
        • Add/Modify Details
          • General
          • Details Configuration
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Split Parts by invisible lines
          • Paneling Configuration
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Drawing Configuration – Sheets
          • Main Features
          • Part Assembly Menu
          • Smart Dimensions
        • Load Families
        • Link Wall
        • Multi-Framing
        • Framing In Groups
        • Add/Delete Additional Details
        • Modify
        • Select Elements
        • Family - Siding Profile Modification
      • Floor Wood Framing
        • Introduction
        • Frame Floor
          • Add Main Frame
          • Add Secondary Frame, Battens, Flooring
        • Load Families
        • Link Floor
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Floor Framing
          • Opening Framing – General
          • Opening Framing – Edit
          • End Connection
          • Edge Joist
          • Blocking/Nogging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Multi-Framing
        • Framing In Groups
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Modify Brace
          • Modify Brace Group
          • Main Features
        • Add/Modify Details
          • General
          • Details Configuration
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
      • Roof Wood Framing
        • Introduction
        • Frame Roof
          • Add Main Frame
          • Add Secondary Frame, Battens, Roofing
        • Framing Configuration
          • Dialog
          • Configurations
          • Common Settings
            • Configuration Settings
            • Modify Configuration Settings
            • Elements Mark Definitions
            • Modify Settings
          • Roof Common Joists
          • Opening Framing
            • General
            • Edit
            • Edit Window/Window Join Framing
          • End Connection
          • Edge Joist
          • Horizontal Joist/Rafter/Bridging
          • Secondary Joist
          • Brace
          • Joist Holes
        • Load Families
        • Link Roof
        • Multi-Framing
        • Add/Modify Elements
          • Main Features
          • Add Additional Bridging/Nogging/Blocking
          • Add Additional Joist
          • Add Vertical Block
        • Add/Modify Bracing
          • Main Features
          • Modify Brace
          • Modify Brace Group
        • Add/Modify Details
          • General
          • Details Configuration
        • Add/Delete Additional Details
        • Modify
        • Align/Trim/Extend
          • Align Elements
          • Cut/Delete/Move/Rotate Elements
          • Split Elements
        • Select Elements
        • Insert Rafters
        • Sheating And Paneling Layouts
          • Main Features
          • Sheathing Configuration
          • Paneling Configuration
        • Numbering
          • General
          • Numbering Configuration
        • Shop Drawings
          • Main Features
          • Drawing Configuration
            • Assembly Views
            • Schedules
            • Sheets
          • Part Assembly Menu
          • Smart Dimensions
      • Truss Wood Framing
        • Introduction
        • Load Families
        • Truss Database Manager
        • Truss System Configuration
        • Truss Design Settings
        • Element Mark Configuration
        • Modify Roof/Floor Truss Type Parameters
        • Insert Truss System Grid
        • Modify Truss System Grid
        • Update Truss System Grid From Roof
        • Insert Valley Set Grid
        • Generate Trusses
        • Delete Trusses By Grid
        • Select Trusses From The Same Group/Grid
        • Select Identical Trusses From The Same Group
        • Insert Roof/Floor Truss By Selected Model Lines
        • Modify Truss Inserted By Model Line
        • Create Roof Truss Type From Model Lines
        • Create Piggyback Roof Truss Type From Model Lines
        • Modify Roof Truss Type
        • Replace Roof/Floor Truss From Database/Model
        • Update Roof/Floor Truss
        • Copy/Array/Auto Array Roof/Floor Truss
        • Auto Copy Two Roof/Floor Trusses
        • Modify Truss Ends
        • Update Truss Roof/Floor Connections
        • Cut/Cope Roof/Floor Truss Members
        • Select Roof/Floor Truss Webs And Chords
        • Frame Two Beams
        • Scheduling And Sorting
        • Shop Drawing Configuration
        • Create Assembly From Truss
        • Update Truss Assembly
        • Smart Dimensions for Trusses
        • Typical Workflow For Floor Truss
      • Smart Connections
      • Smart Walls
      • Floor Panel Layout
      • Roof Panel Layout
      • Cut Opening
      • Sort Mark
      • Smart Assemblies
      • Smart Views
      • Sort&Cope
        • COPE STRUCTURAL ELEMENTS
      • Common
        • Wood/Metal Framing
          • Custom Join
          • Framing Configuration
            • Modify Configuration Settings
            • Modify Settings
            • Opening Framing – Edit
            • End Connection
            • Rigde Stud/Joist
            • Blocking/Nogging
            • Brace
            • Stud/Joist Holes
          • Add/Modify Elements
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Stud/Joists
          • Add/Modify Bracing
            • Modify Brace
            • Modify Brace Group
          • Sheating And Paneling Layouts
            • Sheathing Configuration – Sheathing Layout
            • Paneling Configuration – Paneling Layout
          • Shop Drawings – Smart Dimensions – Configuration
          • Framing Configuration - Configuration Visibility
        • Smart Dimensions
        • Smart Tags
    • Smart Select
      • Select & Hide
      • Quick Select
    • Archive
      • (Archive) Setup: Sample Families & Configurations
      • (Archive) Workflow Overview
      • (Archive) Setup: Sample Families & Configurations
      • Wood Framing (work in progress)
        • Workflow - Step by Step
        • Wall Wood Framing
          • Introduction
          • Frame Wall
            • Add Main Frame
            • Add Secondary Frame, Nailers, Siding
            • Validate Walls
          • Framing Configuration
            • Dialog
            • Configurations
            • Common Settings
              • Configuration Settings
              • Modify Configuration Settings
              • Elements Mark Definitions
              • Modify Settings
            • Wall Framing
            • Opening Framing
              • General
              • Edit
              • Edit Window/Window Join Framing or Window/Door Join Framing
            • L Connection
            • L, T, V, End Connections
            • Ridge Studs
            • Blocking/Nogging
            • Secondary Stud
            • Brace
            • Stud Holes
          • Add/Modify Bracing
            • Main Features
            • Modify Brace
            • Modify Brace Group
          • Add/Modify Elements
            • Main Features
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Stud
            • Add Vertical Block
          • Add/Modify Details
            • General
            • Details Configuration
          • Align/Trim/Extend
            • Align Elements
            • Cut/Delete/Move/Rotate Elements
            • Split Elements
          • Sheating And Paneling Layouts
            • Main Features
            • Sheathing Configuration
            • Split Parts by invisible lines
            • Paneling Configuration
          • Numbering
            • General
            • Numbering Configuration
          • Shop Drawings
            • Main Features
            • Drawing Configuration
              • Assembly Views
              • Schedules
              • Drawing Configuration – Sheets
            • Main Features
            • Part Assembly Menu
            • Smart Dimensions
          • Load Families
          • Link Wall
          • Multi-Framing
          • Framing In Groups
          • Add/Delete Additional Details
          • Modify
          • Select Elements
          • Family - Siding Profile Modification
        • Floor Wood Framing
          • Introduction
          • Frame Floor
            • Add Main Frame
            • Add Secondary Frame, Battens, Flooring
          • Load Families
          • Link Floor
          • Framing Configuration
            • Dialog
            • Configurations
            • Common Settings
              • Configuration Settings
              • Modify Configuration Settings
              • Elements Mark Definitions
              • Modify Settings
            • Floor Framing
            • Opening Framing – General
            • Opening Framing – Edit
            • End Connection
            • Edge Joist
            • Blocking/Nogging
            • Secondary Joist
            • Brace
            • Joist Holes
          • Multi-Framing
          • Framing In Groups
          • Add/Modify Elements
            • Main Features
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Joist
            • Add Vertical Block
          • Add/Modify Bracing
            • Modify Brace
            • Modify Brace Group
            • Main Features
          • Add/Modify Details
            • General
            • Details Configuration
          • Add/Delete Additional Details
          • Modify
          • Align/Trim/Extend
            • Align Elements
            • Cut/Delete/Move/Rotate Elements
            • Split Elements
          • Select Elements
          • Sheating And Paneling Layouts
            • Main Features
            • Sheathing Configuration
            • Paneling Configuration
          • Numbering
            • General
            • Numbering Configuration
          • Shop Drawings
            • Main Features
            • Drawing Configuration
              • Assembly Views
              • Schedules
              • Sheets
            • Part Assembly Menu
            • Smart Dimensions
        • Roof Wood Framing
          • Introduction
          • Frame Roof
            • Add Main Frame
            • Add Secondary Frame, Battens, Roofing
          • Framing Configuration
            • Dialog
            • Configurations
            • Common Settings
              • Configuration Settings
              • Modify Configuration Settings
              • Elements Mark Definitions
              • Modify Settings
            • Roof Common Joists
            • Opening Framing
              • General
              • Edit
              • Edit Window/Window Join Framing
            • End Connection
            • Edge Joist
            • Horizontal Joist/Rafter/Bridging
            • Secondary Joist
            • Brace
            • Joist Holes
          • Load Families
          • Link Roof
          • Multi-Framing
          • Add/Modify Elements
            • Main Features
            • Add Additional Bridging/Nogging/Blocking
            • Add Additional Joist
            • Add Vertical Block
          • Add/Modify Bracing
            • Main Features
            • Modify Brace
            • Modify Brace Group
          • Add/Modify Details
            • General
            • Details Configuration
          • Add/Delete Additional Details
          • Modify
          • Align/Trim/Extend
            • Align Elements
            • Cut/Delete/Move/Rotate Elements
            • Split Elements
          • Select Elements
          • Insert Rafters
          • Sheating And Paneling Layouts
            • Main Features
            • Sheathing Configuration
            • Paneling Configuration
          • Numbering
            • General
            • Numbering Configuration
          • Shop Drawings
            • Main Features
            • Drawing Configuration
              • Assembly Views
              • Schedules
              • Sheets
            • Part Assembly Menu
            • Smart Dimensions
        • Truss Wood Framing
          • Introduction
          • Load Families
          • Truss Database Manager
          • Truss System Configuration
          • Truss Design Settings
          • Element Mark Configuration
          • Modify Roof/Floor Truss Type Parameters
          • Insert Truss System Grid
          • Modify Truss System Grid
          • Update Truss System Grid From Roof
          • Insert Valley Set Grid
          • Generate Trusses
          • Delete Trusses By Grid
          • Select Trusses From The Same Group/Grid
          • Select Identical Trusses From The Same Group
          • Insert Roof/Floor Truss By Selected Model Lines
          • Modify Truss Inserted By Model Line
          • Create Roof Truss Type From Model Lines
          • Create Piggyback Roof Truss Type From Model Lines
          • Modify Roof Truss Type
          • Replace Roof/Floor Truss From Database/Model
          • Update Roof/Floor Truss
          • Copy/Array/Auto Array Roof/Floor Truss
          • Auto Copy Two Roof/Floor Trusses
          • Modify Truss Ends
          • Update Truss Roof/Floor Connections
          • Cut/Cope Roof/Floor Truss Members
          • Select Roof/Floor Truss Webs And Chords
          • Frame Two Beams
          • Scheduling And Sorting
          • Shop Drawing Configuration
          • Create Assembly From Truss
          • Update Truss Assembly
          • Smart Dimensions for Trusses
          • Typical Workflow For Floor Truss
        • Smart Connections
        • Smart Walls
        • Floor Panel Layout
        • Roof Panel Layout
        • Cut Opening
        • Sort Mark
        • Smart Assemblies
        • Smart Views
        • Sort&Cope
          • COPE STRUCTURAL ELEMENTS
        • Common
          • Wood/Metal Framing
            • Custom Join
            • Framing Configuration
              • Modify Configuration Settings
              • Modify Settings
              • Opening Framing – Edit
              • End Connection
              • Rigde Stud/Joist
              • Blocking/Nogging
              • Brace
              • Stud/Joist Holes
            • Add/Modify Elements
              • Add Additional Bridging/Nogging/Blocking
              • Add Additional Stud/Joists
            • Add/Modify Bracing
              • Modify Brace
              • Modify Brace Group
            • Sheating And Paneling Layouts
              • Sheathing Configuration – Sheathing Layout
              • Paneling Configuration – Paneling Layout
            • Shop Drawings – Smart Dimensions – Configuration
            • Framing Configuration - Configuration Visibility
          • Smart Dimensions
          • Smart Tags
  • 2D Drafting & Documentation
    • Smart Documentation
      • Views (Smart Views)
      • Assemblies (Smart Assemblies)
      • Predefined Dimensions (Smart Dimensions)
      • Numbering (Sort Mark)
      • Create Tables (Excel2R)
      • Manage Tables (Excel2R)
      • Import Data From Excel (Excel2R)
      • Dynamic Legend
        • Sample Block Preparation
        • Create / Edit Legend
        • Create / Edit Legend With Preselected Types
        • Update All Legends
      • Manage Sheets/Viewports (Smart Sheets)
        • Manage Sheets
        • Manage Viewports
      • QR/Barcode Generator
      • Distribute Views on Sheets
      • Quick Dimensions
        • Dimension Chains Between 2 Points
        • Walls Dimensioning
        • Dimension Offsets and Joining
      • Rebar Images
  • Design Data Management & Exchange
    • Classification System
      • Quick start
      • Create classification system
      • Create table
      • Create/edit classes and sub-classes
      • Import / export Excel tables
      • Comparing classification systems
      • Managing users and their rights
      • Update user profile
      • Extensions
        • Extension for Autodesk® Revit®
        • Extension for Autodesk® Navisworks®
        • Extension for Autodesk® Civil3D®
        • Extension for TEKLA Structures
      • Value Pattern
    • CNC Exporters
      • Getting Started
      • Weinmann BTL
        • INTRODUCTION
        • User Interface
          • Ribbon
          • Export Setup window
            • Common Settings
              • Advanced Setup (Element Identification and Mark)
            • Export Settings
            • Advanced Setup Configuration
          • Advanced Setup window
            • Interior Sheating Nailing/Stapling
            • Exterior Sheating Nailing/Stapling
            • Siding Trimming
            • Siding Nailing
      • Weinmann BTL CLT
        • INTRODUCTION
        • FEATURES
      • Weinmann WUP
        • Introduction
        • User Interface
          • Ribbon
          • Export Setup window
            • Common Settings
              • Advanced Setup (Element Identification and Mark)
            • Export Settings
            • Advanced Setup Configuration
          • Advanced Setup window
            • Element Identification
            • Main Frame
            • Membrane Nailing
            • Interior Sheathing Nailing/Stapling
            • Exterior Sheathing Nailing/Stapling
            • Sheathing Trimming
            • Position Marking
            • Siding Trimming
            • Siding Nailing
      • Hundegger BVX
        • Introduction
        • User Interface
          • Ribbon
          • Export Setup window
            • Common Settings
              • Advanced Setup (Element Identification and Mark)
            • Export Settings
      • EasyFrame EZF
        • INTRODUCTION
        • FEATURES
        • EXPORT SETUP
        • ADVANCED SETUP
      • CNC Metal Exporter
        • Introduction
        • Revit Add-in
          • Getting Started
          • Features
          • Set New or Modify CNC Type
          • Adjust Detail Families for Export
          • Most Popular CNC Commands
        • Cloud Version
          • Getting Started
          • Upload Revit Project
          • Start Export
          • Modify CNC configuration settings
          • Invite Users
    • Smart Browser
      • Introduction
      • Getting Started
      • Browser Options
      • Library Creation
      • Modify Families
        • Modification Window
        • Saving Modification file
      • Modification functions
      • Modify Families in Excel
      • Run Modifications
      • Update Families in Project
      • Project Browser
      • Add Subcategories
      • Upgrade Families / Projects
      • Transfer Family Units
      • Add Shared Parameters
  • Common for several products
    • Floor Panel Layout
      • Introduction
      • Panel Layout
      • Floor supports
      • Create Panels
      • Place Floor by Room
      • Direction of slab layout
    • Roof Panel Layout
      • Introduction
    • Smart Assemblies
      • Workflow
      • Shop Drawing Configurations
        • Introduction
        • Assembly Views
        • Common options
        • Sheets
        • Insert Grid Lines
        • Schedules
      • Dimensioning Rules
        • Introduction
        • Main Element Geometry
        • Hosted Metal Details
        • Hosted Concrete Details
        • Smart Dimensions
        • Rebar Bars
        • Dimensioning Priority & Notes
        • Note positioning
      • Special Parameters
        • Build in Place
        • Special Parameters for Gravity Point
        • Exclude from Gravity Point Calculations
        • Exclude from Total Measure
      • Create and Auto Create Assemblies
      • Update and Update by DC
      • Recalculate Assemblies
      • Manage Assemblies
      • Modify SDC by Instance
      • Save SDC from Assembly
      • Create Rebar images
      • Dynamic Smart Assemblies Update
      • Template Project
      • Gravity Point and Element Mass
      • How to Add Legends to Assembly Sheets
    • Smart Dimensions
      • Introduction
      • Menu
      • Configuration Window
      • Configuration Settings
      • Common Settings
      • Text Note Settings
      • Dimensioning Tabs
      • Structural Rebar
      • Dimension to Nearest
      • How to measure elements from Linked models
      • How to measure any desired point of a family
      • Smart Dimensions Configurations (new)
    • Smart Tags
      • Smart Tags Configurations
      • Smart Tags Menu
      • Tagging/Dimensioning Tabs in Smart Tags & Smart Dimensions
    • Smart Views
      • Workflow
      • Configuration Setup
      • View Name
      • Smart Dimensions
      • Smart Tags
      • Distribute Views on Sheets
    • Smart Walls
      • INTRODUCTION
      • MODIFY CALCULATE
      • GAP CONFIGURATION
      • SPLIT WALLS
      • INTERLOCK SPLIT MENU
    • Sort Mark
      • Room, Space, Sheet, Element Numbering
      • Batch Numbering Elements
      • Element Marking One by One
      • QR/Barcode Generator
      • Door Swing Directions
      • Grid Numbering
      • Orientation (N, S, E, W)
      • Flip (Mirror) Orientation
      • Calculate Coordinates
      • Calculate Elevations
  • Getting started
    • Quick Start
      • ARKANCE Dock System Requirements
      • ARKANCE Dock Installation Guide
      • Trial Activation
      • Standalone vs Network license
      • Standalone License
        • Standalone License Activation
        • Standalone License Migration to a New Workstation
        • Standalone License Deactivation
      • Network License
        • Network License Activation
        • Network License Manual Activation
        • Network License Deactivation
        • Network License Migration to a New Server
        • Network License Server Renewal
      • Updates
    • FAQ
      • Who is currently using network license seats?
      • Where to find my License Activation Key?
      • How to hand off a Network License seat to another User
      • Where can I find tool configurations?
      • How do I borrow a network license?
      • How to hide/unhide an add-on from the Revit ribbon?
      • How to remove a tool from the Revit ribbon
      • How to release a Network License
      • How to revert to a previous version of a tool?
      • Technical Support Workhours
    • Troubleshooting
      • Unexpected Error Occurred
      • Fatal Error Occurred
      • Unable to deactivate the previous license
      • Excel2R Error When Updating or Creating New Schedules
      • Slps.Distributor.Host.exe in Quarantine by anti-virus
      • I bought a license, but it shows a trial version
      • Access to the path 'TOOLS 4 BIM’ is denied
      • Cannot access AppStore error
      • ARKANCE Dock does not appear in the Revit ribbon after installation
      • Provided key is for a single machine license error
      • An error occurs when activating the license
      • Location path is too long
      • Unable to download the ARKANCE Dock via https://agacad.com/dock
      • An unrecoverable error has occurred
      • Network License: Server Installation Error
      • Network License: Agacad Dock Deployment
      • Tools' .msi direct links
      • Network License: Server Error in ‘/Web’ Application
      • Network License Error: Maximum number of activations exceeded
      • Network License: License is Not Visible
      • Network License: Could Not Connect to the Server
      • Network License: Activation Failed Error
      • Network License: Borrowed License Release Issue
  • contact support
Powered by GitBook
On this page
  • Sample Projects
  • Sample Configurations (presets)
  • Arkitech
  • Howick
  • Knudson
  • Metroll
  • Pinnacle
  • Royal C.N.C Technology
  • Scottsdale

Was this helpful?

  1. Design Data Management & Exchange
  2. CNC Exporters
  3. CNC Metal Exporter
  4. Revit Add-in

Getting Started

Last updated 1 month ago

Was this helpful?

Sample Projects

Below you can download Revit 2024 sample projects with light-gauge steel framing models created using BeSmart Metal Collection solution.

Sample Configurations (presets)

Be.Smart CNC Metal Exporter offers a list of sample configurations (also known as presets) for different CNC machines. Users can duplicate, rename or modify these configurationsand their commands.

Arkitech

Since 2012 Arkitech has invested in high-quality machinery and high-end equipment and setting up a team of highly skilled engineers and technicians to offer a complete Light Gauge Steel (LGS) manufacturing solution.

Our CNC Metal Exporter has a configuration that exports CSV format files suitable for Arkitech CNC machines to produce wall, floor and roof frames as well as trusses.

Howick

Howick manufactures precision roll-forming machines and technology for light steel framing. For over 40 years they’ve designed machines that can now be found in use by construction firms in 75 countries around the world.

Our CNC Metal Exporter provides three sample configurations for Howick machines:

  • Howick 4200 for CSV 1.0 format (for roof and floor trusses)

  • Howick CNC Configuration for CSV 1.0 format

  • Howick CNC Configuration CSV2 for CSV 2.0 version format

Howick configurations generate CSV extension files readable by Howick machines for wall, floor, and roof frames as well as trusses.

The difference between the Howick 4200 and Howick CNC Configuration is in the coding. For example, Howick CNC configuration uses the DIMPLE command, whereas Howick 4200 uses the FLANGE1 command.

Meanwhile, the Howick CNC Configuration CSV2 format utilizes a different coding format that writes the coordinates of beam corners.

Knudson

Knudson has a reputation as one of the United States’ most prominent roll forming machinery builders. For over 60 years, their roll former machines and solutions have fueled the success of prefab manufacturers, contractor/manufacturers, subcontractors and component suppliers.

Our CNC Metal Exporter offers a configuration that generates TXT format files. The configuration is suitable specifically for the Knudson KFS-T1420 CNC machine.

Metroll

Metroll is a leading manufacturer and supplier in Australia of steel building products, including roofing, cladding, rainwater, structural, and fencing.

Our CNC Metal Exporter provides two configurations for Metroll:

  • Metroll CNC Configuration C+C

  • Metroll CNC Configuration

Both configurations use different coding depending on the machine and generate separate TXT extension files for studs and plates (tracks). This application can export wall, floor, roof frames, and trusses.

Below is a comparison between two Metroll configurations when exporting stud profiles:

Pinnacle

Pinnacle is the leading global total solution provider of steel framing technology. Company researches and develops world’s most advanced robotic machines for steel framing industry. Pinnacle covers 5 continents and over 50 countries and regions around the world.

Our CNC Metal Exporter generates Part.List format files suitable for Pinnacle CNC machines:

Royal C.N.C Technology

Recognized as a leading manufacturing of extrusion tooling in North America, Royal C.N.C offers a wide variety of tooling packages, including Design, Pre-Tuning, and Post Extrusion Tooling:

Our CNC Metal Exporter provides one sample configuration of export for Royal CNC machines - Royal AMS XL206. This configuration generates TXT extension files readable by automated Royal machines.

The result with studs and plates can be checked in any text reader:

Scottsdale

Scottsdale Construction Systems is a New Zealand-based company that focuses on research and development and develops innovative technology for the house building and construction industries. Since 1995 it has provided world class solutions for prefabricating steel frames and trusses for residential and commercial construction.

Our CNC Metal Exporter provides a ScotSim configuration that exports TXT extension files suitable for Scottsdale CNC machines.

Below is an example of a floor framed with our Be.Smart Metal Framing in Revit. The model exported with our CNC Metal Exporter can be checked in the Scottsdale viewer:

The result can also be loaded into Scottsdale’s machine simulator that makes a virtual frame and informs the user of any issues:

73MB
Imperial_CNC Metal Exporter sample project.rvt
31MB
Metric_CNC Metal Exporter sample project.rvt