# INTRODUCTION 1/13/23, 11:47 AM INTRODUCTION : AGACAD ### INTRODUCTION Modified on: Thu, 19 Aug, 2021 at 7:47 PM **AGACAD’s EasyFrame** allows manufacturers of timber house frames to predefine rules for automated CNC machines, including naming and marking operations for every framing member – directly from Revit. Walls, floors, roof framing members, or individual framing elements can be exported using this application. [The **EasyFrame** must be used with **AGACAD Wood Framing Software (https://agacad.com/products/bim-solutions/woodframing-professional-suite)**, which creates the framing elements with all the necessary geometry and information data within ](https://agacad.com/products/bim-solutions/wood-framing-professional-suite)the Revit project. [Below is an example of a floor frame created using **Wood Framing Floor (https://agacad.com/products/bim-solutions/woodframing-floor)** and then exported to EstiFrame machine:](https://agacad.com/products/bim-solutions/wood-framing-floor) ![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FQhGupTJRXotS9HF8SpOx%2F0.jpeg?alt=media) A EZF file is created with all information from the selected floor. This file can be now pushed to the CNC machine for production: 1/2 1/13/23, 11:47 AM INTRODUCTION : AGACAD ![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FAt58H5fOSM918Ya8HiP3%2F1.jpeg?alt=media) The EZF file contains all needed operations and information for cutting and marking. ![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FQCwueKnp6VW6IPgeGvz0%2F2.png?alt=media)Preview ![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FBIfuXmavzPFMlyamkG9N%2F3.png?alt=media) 2/2