# Export Setup window

EXPORT SETUP

Modified on: Sun, 8 Aug, 2021 at 7:00 PM

![](/files/89DfDkgXJGpqzfaNvRW0)

**Export Setup** – settings where you can define CNC file locations, project information parameters, identification and marking of elements, CNC command naming, etc.

### Configuration

![](/files/rT6LOSXJNSxgB9MgpQOX)

**Configuration** – configuration with export settings. You can use sample or create new configurations. Also, you can rename or delete the existing configurations.

By default, **CNC Exporter** configurations are saved in *C:\Users\user name\AppData\Roaming\Tools 4 Revit\BTLWood (or other version)\Export Configuration* catalog. The content from this catalog can be copied to other users' computers if needed. The path can be changed in **CNC Exporter** – **Weinmann BTL and BTLx Exporter** → **Configuration Files’ Location**.

![](/files/6BFZlAtSgruUX4WK55z8)

### Location for export of CNC files

![](/files/0emPyIJw7LlRtVYCFzUY)

**Location for export of CNC files** – select where to export CNC files. It can be project file location or any other custom location.

### Project Information Parameters

![](/files/cOAdoObYEqOXnNcbOjaX)

**Project Information Parameters** – define parameters to take values of project name and project number. These parameters comes from **Revit → Manage** → **Project Information**:

![](/files/myYaC3UrULtySmIPBbgw)

Result in exported BTL file:

![](/files/PoODy3iPPAhlHQlYuu9e)

### Element Identification and Mark

![](/files/aSw5PNpAm5l6hmU8Rye8)

**Element Identification and Mark** – select element identification and marking configuration. This goes to advanced settings where you can predefine marking for plates/rims joists, girders, studs, joists and columns. Also you can make special element filtering.

![](/files/hIBpeFIVgx2v1R5rdSS2)

![](/files/dASlUJQewNAsWnSeZzcV)

[**Read more about every advanced feature here >> (https://helpdesk.agacad.com/support/solutions/articles/44002246442advanced-setup)**](https://helpdesk.agacad.com/support/solutions/articles/44002246442-advanced-setup)

### Automatically skip not marked Elements

![](/files/KjFoJ1gGmXLrHANFo3Pt)

**Automatically skip not marked Elements** – automatically skips elements if **CNC Part Number** parameter is empty.

If this option is switched OFF then the product will show a warning message with information about missing value.

![](/files/XZHTX8RXfDStgNxk5l0Z)

*Such element is not exported in BTL file:*

![](/files/YRQnmVgw3nnEvMZxOQIv)

### Automatically skip filtered out Elements

![](/files/Q7BehDOM6ObKCSWJuecJ)

**Automatically skip filtered out Elements** – automatically skips filtered out element from configuration.

![](/files/0KGNKaRIELyyJ9KckqTf)

### Marking Orientation by

![](/files/ODoeLhtcIfJWQNX5Zh1h)

**Marking Orientation by** – marks can be oriented by host (Wall, Floor, Roof, Truss) or by structural framing elements.

### Assembly Station Mode

![](/files/8ksXY8uovMZpaTaL3fY3)

**Assembly Station Mode** – select if export has to be in one file or in separate files for each wall/floor/roof panel.

### Framing Elements

![](/files/DZs62hMoJojGAomZkwSu)

**Export Frame** – CNC Exporter exports main frame of wall, floor, roof.

**Split to Separate Files by** – select parameter for splitting elements into separate files.

### Export Frames

![](/files/KbfE5VhZLRVhyptjkUPQ)

**Order Hosts by** – possibility to order hosts by ID or Mark.

### Framing Details

![](/files/bZ0vQkHIwvGR8XqA4ZG7)

**Export Wood Details** – exports information about the details.

![](/files/n6F26QfPhg6oBtT2O9Ox)Preview


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.besmart.software/design-data-management-and-exchange/cnc-exporters/btl-exporter/user-interface/export-setup-window.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.