> For the complete documentation index, see [llms.txt](https://docs.besmart.software/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/wall-reinforcement/wall-reinforcement-workflow.md).

# Wall Reinforcement Workflow

{% embed url="<https://www.youtube.com/watch?index=1&list=PLzDqpnw6ReoO9uB1YIUWTJ-aobaNj3UAI&v=GogCDcL7lp4>" %}

Make sure you have Rebar Shapes in your model. They should be visible in your Project Browser:

<div align="left"><img src="/files/yl6zFl8Pg52iPjqiw3xF" alt=""></div>

If you don't have them, load them from Library

![](/files/IK1ialY2JEE9iZQm573D)

2. Prepare Rebar Configurations.

<div align="left"><figure><img src="/files/SvgQ7kNBo2v9i3K4nv9n" alt=""><figcaption></figcaption></figure></div>

<figure><img src="/files/i3x5vMOxfdTczR2qRgYo" alt=""><figcaption></figcaption></figure>

3. Use **Wall Link** to assign configurations to wall layers. You can do this from the configuration window via **Link Wall**, then save your assignments using the **Save** button at the bottom of the configuration window.

<figure><img src="/files/aXfV13uvZ2tNZ3kMtYW4" alt=""><figcaption></figcaption></figure>

or directly through the **Wall Reinforcement toolbar:**

<div align="left"><figure><img src="/files/kVEWN4fNcKfimQ91MFzb" alt=""><figcaption></figcaption></figure></div>

<figure><img src="/files/RSl1ljdjMs8XxmRVbZPA" alt=""><figcaption></figcaption></figure>

4. Select the Wall(s) with that Type (used in Wall Link) and use the Create Rebar command. It will read from Wall Link what reinforcement configurations should be used and create rebar.

<div align="left"><figure><img src="/files/Od39LBqcaTNLXmKprCOy" alt=""><figcaption></figcaption></figure></div>

Result:

<div align="left"><figure><img src="/files/BoHwTCXgzQr9pWUJPQDP" alt=""><figcaption></figcaption></figure></div>

<div align="left"><figure><img src="/files/ovb4xFyr1wEbEqsdozmi" alt=""><figcaption></figcaption></figure></div>

<div align="left"><img src="/files/E4S7awERlBpSzEfEfsNG" alt=""></div>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/wall-reinforcement/wall-reinforcement-workflow.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.