# Wall Link \[old]
Links Rebar Configuration with selected wall layer. Choose which configuration should be used on each wall layer.
1. Create Rebar Configuration.
2. Select wall and click Wall Link.
3. In the following dialog window assign configuration for each layer which should be reinforced.
Now you can use the Create Rebar command for this wall type which already has configurations assigned through the Wall Link.
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/wall-reinforcement/wall-link-old.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.