# Create Rebar

The Create Rebar command creates reinforcement for selected walls if Rebar Configs have already been created and assigned to the Wall through the Wall Link.

1. Create Rebar Configurations.
2. Assign Rebar Configurations to Wall Layers by using Wall Link command.
3. Select Walls and use **Create Rebar** command.

![](/files/NWFCqiaDh3Tts79LhEGY)

4. Reinforcement will be created.

![](/files/ypG9k8oDuJ4gyDst9Irs)

Other sequence for creating rebar is:

1. Select Create Rebar command.
2. Select Walls.
3. Click Finish at the top left of working window.

![](/files/u1JfEi033q0YAejbTBjm)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/wall-reinforcement/create-rebar.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.