# Additional Edge Rebar {% embed url="" %} Additional Edge Rebar options are available in an additional tab – Additional Edge Rebar' – in 'Perimeter reinforcement'.

You can place straight, L, and U shaped bars at selected **vertical** and **horizontal** edges of the wall. **Note:** L-shape is placed only if there is a corner cut. L-shape CW and CCW will place L shape rebar on perimeter edges like U shape reinforcement.

Schematic image for configuration above.

**New Item** - adds a line of settings, wherein you can define what kind of bar should be created and define other necessary settings\ **Remove, Move Up, Move Down** - changes order of added lines or removes selected lines\ **Count** - number of bars that should be created through the thickness of a wall layer. Count can be 1 or 2 bars per line.\ **Rebar bar type** - type of rebar that should be used\ **Wall Edge** - select on which edge of the wall rebar should be created\ **Min/Max search distance** - defines range where bars will be created from selected wall edge *Example 1* Min distance does not allow you to create bars at top and bottom of a given wall.\ Max distance limits placement of bars at deeper cuts.

*Example 2* All edges are within search distance limits, so bars are created at all edges.

**Anchorage distance** - extension of ***straight*** and ***L shape*** bars from perpendicular edge, if there is such

**L-Shape leg length** – leg length for U- and L-shaped bars

**Position -**\ If Count = 1, bars can be placed from center or external/internal side of the wall.\ If Count = 2, bars can be placed from external/internal sides of the wall. **Edge cover** - distance from edge **Interior/Exterior Cover** - distance from side faces of the wall **End cover** - For straight bars, this is the distance from the end of the bar to the perpendicular edges. For L- and U-shaped bars, it's a cover for legs from perpendicular edges. ![](https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2Fsd44nSsCtyTJcqgho251%2F9.png?alt=media)