# Workflow
1. Make sure you have Rebar Shapes in your model. They should be visible in your Project Browser:
If you don't have them, load them from Library.
2. Prepare **Rebar Configuration** for selected column section.
3. Assign configurations to Structural Column Types by using **Column Link**.
For each column Type assign Section and Configuration.
4. Select Structural Column(s) with the Type used in Column Link, and use **Create Rebar** command. It will read which reinforcement configuration should be used from the Column Link and will then create rebar.
**NOTE:**
1. corbels must be created as separate families, they can not be part of Structural Column family. For more info, see help file about corbels.
2. if you need to have a cut in the column, use families with voids instead of adding voids to Column family.
Result:
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/column-reinforcement/workflow.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.