# Modify Reinforcement

Change reinforcement settings for selected Structural Column element.

1. Select **Modify Rebar**.

<div align="left"><figure><img src="https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FeAgm7dRD0apFOEaLnNoD%2F0.jpeg?alt=media" alt=""><figcaption></figcaption></figure></div>

2. Select rebar. Configuration window for selected reinforcement will open. You can see the name of the configuration in the upper-left of the Reinforcement Configuration window:

<figure><img src="https://239424168-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FqtUsszuAWXIZhQhrvjnb%2Fuploads%2FMFFgBVnXoAQsjAu2DnsU%2FCR_Modify%20Rebar%20_command.png?alt=media&#x26;token=d28aec41-ef3d-47e6-a5d9-aa0b7942155f" alt=""><figcaption></figcaption></figure>

2. Make desired changes in configuration window – add rebar, switch off selected rebar, change rebar type, step, hooks, or other settings – and finish with Save & Close.

Reinforcement will be updated for that Structural Column instance, and changes made in configuration will be saved in the Configuration File's Location.

Alternative sequence of steps:

1. Select Rebar.
2. Select **Modify Rebar**. Configuration window for selected reinforcement will open.
3. Make desired changes in configuration window – add rebar, switch off selected rebar, change rebar type, step, hooks, or other settings – and finish with Save & Close.