# Main Rebar - Ends

Options for adding different end shapes of Main rebar:

<figure><img src="/files/q9sbYjyhEKViJAxRk1Py" alt=""><figcaption></figcaption></figure>

These options can be used only after Main rebar layout has been defined.

**Row position** and **Rebar bar type** - these columns come from the Layout tab and show all rebar defined there.

Then for selected rebar you can define the ending option:

**End Type**

* **Straight** - simple start/end offsets of main bars will be used as they are defined in the Layout tab.
* **Type 1** and **Type 2** - see pictures and parameters in next columns to define their shape.&#x20;

**Side** - define at which end of the beam selected rebar shape should be applied

![](/files/2W8SX6Gqxo892ukDujqf)

**L1/C1/L2/C2** - defines values for bars ends:

<div align="left"><figure><img src="/files/ORKIbXMgxVUz0pg6N1aT" alt=""><figcaption></figcaption></figure></div>

**Rebar start/end hook types** - enable selection of hook types within the project.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/beam-reinforcement/configuration-settings/main-rebar-ends.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.