# Beam Reinforcement Workflow
1. Make sure you have Rebar Shapes in your model. They should be visible in your Project Browser:
If you don't have them, load them from Library
2. Prepare **Rebar Configuration** for selected beam section.
First define Main rebar settings, then Stirrups. Stirrups will be tied around the main rebar.
3. Assign configurations to Structural Framing Types by using **Beam Link**.
4. Select Structural Framing(s) with the Type used in Beam Link, and use **Create Rebar** command. It will read from the Beam Link which reinforcement configuration should be used and will then create rebar.
Result:
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.besmart.software/3d-modeling-and-design/precast-concrete/feature-descriptions/beam-reinforcement/beam-reinforcement-workflow.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.